.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   XT660Z T�n�r� Tech Section ( https://www.xt660.com/forumdisplay.php?f=163)
-   -   What Bars? ( https://www.xt660.com/showthread.php?t=13386)

theclowncrusty 16-03-10 19:54

What Bars?
 
Hi gang. what after market handle bars have people fitted? I am looking the rise the bars to get my ass off the seat when trail riding ( bars are too low to do this at the moment.)
Bar risers are from �30-�50 so i thought that a complete bar change might be a better way to go. I dont want to mess about with longer cables and stuff, so any ideas for a straight swap would be good.
Crusty

tripletom 16-03-10 21:35

Enduro high Renthals- http://www.bandcexpress.co.uk/handle...rise-bars.html Prefix code 613.
Had to trim 15mm off each end but they fitted with stock cables.
If you go for some 'fat bar' risers, I've got a pair of KTM bend Renthal fat bars you can have cheap.

uberthumper 17-03-10 10:21

How much higher are the Renthals than stock Tom? I need to sort out something higher for our little jaunt in July.

tripletom 17-03-10 12:29

Alright Dave. The 613 enduro high bend are probably about twice is high as stock. They could do with being slightly higher for me with my gibbon arms, but that would mean longer cables etc.

theclowncrusty 17-03-10 14:06

Hi Tom, thanks for the link. Are the ones shown in the link higher than stock? All bars look the same to me :( I want to go as high as you can with standard cables with simple straight on fittment.
mark

tripletom 17-03-10 14:37

Hey Mark no probs, yes they are higher than stock. These pics don't really show it too well as I have the bar pad on, but you should get the idea-

Stock-

http://i97.photobucket.com/albums/l2...s/IMG_1619.jpg

Renthals-

http://i97.photobucket.com/albums/l2...s/DSC00281.jpg

You will need to take some width off them, like I said, I found 10-15mm each side was ok. Also, the OE bar end weights will NOT fit.

enduro374 17-03-10 18:00

So are your panniers wider than the bar ends?

I wouldn't trust myself with a wider read end - only a matter of time...

tripletom 17-03-10 19:53

Quote:

Originally Posted by enduro374 (Post 123696)
So are your panniers wider than the bar ends?

I wouldn't trust myself with a wider read end - only a matter of time...

15mm, and so far I've managed to avoid any problems by using some common sense.

stuxtttr 19-03-10 12:01

This is the route I want to go down just need a bit more rise for standing up off road, I have a set of renthals in the garage i will try first I managed to get them cheap without the brace a few years back.

Is �40 cheaper than risers ? anyone ?

Gas_Up_Lets_Go 19-03-10 12:28

Quote:

Originally Posted by stuxtttr (Post 123900)
Is �40 cheaper than risers ? anyone ?

For some for �37 +P&P. here -> http://www.motorcycle-road-and-race....ers-yamaha.php


Having the same debate with myself... bars (and new heated grips) or risers.....Hmmmmm


or, these are on ebay

http://cgi.ebay.co.uk/Motor-cycle-Ha...item2c50fb2fcf


All times are GMT +1. The time now is 08:01.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.