![]() |
![]() |
![]() |
|
|
XT660Z Mods Share views on all the mods you have done and those you intend to do |
![]() |
|
Thread Tools | Display Modes |
#
1
|
|||
|
|||
DNA kit
I have read all the posts (I think) and have located a DNA dealer near me but has anyone fitted the kit to their bike yet ?
Would be interested in any feedback. Having had 6 WR enduro bikes many of the guys drilled holes in the airbox and removed the snorkel to improve fueling etc.
__________________
ex :tenere:1200 now 660 + ![]() |
#
2
|
||||
|
||||
Quote:
Just my 2 cents....OGR
__________________
We are now retired....so....... lots of this ![]() ![]() ![]() ![]() |
#
3
|
|||
|
|||
Good point, i can't believe no one has tried the kit yet
![]()
__________________
ex :tenere:1200 now 660 + ![]() |
#
4
|
||||
|
||||
Nor can I.
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 ![]() |
#
5
|
||||
|
||||
One of the reason why no one has yet tried this kit is perhaps the fact that they are hard to get and I can't find a stockist in UK as yet. So ideally for the time being they are only available directly from DNA Filters Ltd. and hopefully through us in the near future.
![]() |
#
6
|
|||
|
|||
breathe freely!
I don't have the DNA kit, but I do have a K&N filter fitted, with the snorkel removed from the airbox, so the airbox lid is the same as the DNA one.
I think it's a worthwhile mod, as the motor does feel more "snappy", but I haven't had the time to get it on a dyno and check it out. My next mod when time allows will be a PCIII and a dyno session!
__________________
-- Triumph Explorer 1200 -- |
#
7
|
|||
|
|||
Well i don't like waiting so i will be the test pilot, mine ordered and should arrive Tuesday from the UK distributer
![]()
__________________
ex :tenere:1200 now 660 + ![]() |
Sponsored Links |
#
8
|
|||
|
|||
Hi Den, who is the UK distributer? How does the price compare with offtheroad.de ?
Has anyone ordered from DNA direct or contacted the bloke who has registered here? Any discounts on offer? |
#
9
|
|||
|
|||
Should also note that I don't think the DNA guy recommends adding the filter and snorkel replacement cover without adjusting fuelling via a Power commander or such like. I think it's ok with the filter alone but snorkel removal may be a step too far.
Be careful with this folks because I'm speaking from experience having holed a piston on an 1150GS just by adding a can and y-piece! |
#
10
|
|||
|
|||
UK distributor is based in Hereford B R Special tuning
http://www.motorcycle-exhausts.co.uk/index.php
__________________
ex :tenere:1200 now 660 + ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|