How on earth do you get these wheel to remain black, just bought my 2011 and the wheels have faded with ****e weather and the spoke rusting.
Now I've seen on the auction sites that your get spoke wraps which slide overs the spokes like a plastic cover and are available in loads of colours, Do a google search for images. Now i would assume we would have to put some sort of grease or oil on the spokes first to stop any water eating away at the steel spokes .
Any views on the spoke wraps �19.99inc delivery fleebay. My Tenere would look great. will post a photo if i decide to buy some.

Don't know about the spoke covers.

However, without doubt, the stuff you need to prevent further corrosion is ACF-50.

__________________

ImageUploadedByTapatalk1416190878.625686.jpg ImageUploadedByTapatalk1416190910.641221.jpg+1 for spoke wraps


Xt660x 04

They far feom protect as watee still gets in :/ your better off with stainless spokes


Xt660x 04

Yep - without any doubt at all.

I spent an hour yesterday, with a little pot of ACF50 and a modelers paintbrush giving each spoke a very light application, including the nipple. Yes it takes time, but my bike has seen 5 winters and the corrosion is negligible. Be careful not to overload it, it takes very little and you don't want it running off on to your tyres.

As for the paint fade on the wheels, you can restore it with a wipe of silicon oli, back-to-black bumper care stuff.

ACF50 is also the stuff you need to stop corrosion all over the bike, yes it's expensive, but go for the 1litre bottle with a hand pump (about �30) rather than the aerosol tins (about �15 each) as it lasts much much longer, is easier to apply and more accurate.

edit: If you use spoke covers, you'll end up making matters worst, they will hold the salty water longer.

__________________
>-------<

Never underestimate the power of stupid people in large groups.

Does acf 50 help clean the spokes or will it just stop corrosion? Doesn't look like mine have ever been cleaned

This is how annoyed I got with my one year old spokes and rims on my beloved Tenere. ...the more I cleaned them the worse they became. Steve

The long term solution. ...powder coat rims....rebuild with stainless steel spokes. Approximate cost �300...more if you buy new rims. Steve

Well worth it!