Well the parcel arrived safely today from the UK.

I had it installed & ready to run in 15 min.

I have only temporary mounted it on my bar pad as I get my new bike 11 days time. It's features are.

1> You can swop over maps while the bike is running. You can adjust the fuelling while riding, I like that part.

2> You can not get into the LCD display when the bike is not running so all adjustments are done with the motor running. Or the USB cable is inserted into the LCD display from your PC

3> You can set the revcounter to any range & adjust the yellow & red zones. It has a analog & digital revcounter reading at the same time.

4> You can only set the TPS when a 9V battery is installed into the Power Commander or the USB cable from your PC. The adjustment can now be done at the LCD display.

5> The speedo feature does not work, as our engine ECU's do not receive a road speed signal. Not to worry as the speedo is only in MPH & can not be set KPH.

6> TPS display, is very handy running it against the rev counter, makes it easy to play with the fuel map if you have a problem in specific map range.

7> There is also a record function, that will record your Dyno run or just a general ride to town. It has a play back feature that shows fuelling amount,TPS positions, rev counter, duty cycle. I did a short run to the shops & then played back my ride on the display it was quite interesting to see how I rode, in what rev range & what throttle openings.

I did swop maps on the run & it worked perfectly, I even adjusted the fueling on one of the fuel maps to see if it was working. It is a little hard to see in bright sun light but still visible. I think I will have a bit of fun with this new LCD display.

If you are looking for one, Contact Simon in the New Year at Carbon Can company, I'm sure he will give you a good deal.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946