Home

Go Back   .: XT660.com - The #1 XT660 Resource :. > XT660X & XT660R > XT660X/R Tech Section
FAQ Calendar Search Today's Posts Mark Forums Read Main site

Google

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  # 1  
Old 06-08-15, 21:13
skippington skippington is offline
Newbie XT-Moto
 
Join Date: Jun 2015
Location: Bristol
Posts: 6
skippington is on a distinguished road
HELP! Why is my engine pinking?

Hello everyone!

So...I'm about 700 miles from home and my engine's started making a funny noise. I need to set off tomorrow after a trip to a garage (I've got a wedding to get to), but I was hoping to go armed with some idea of what might be happening...CAN YOU HELP?!!

I'm pretty sure the noise is pinking (I've heard it before on a car). Here's some extra info in no particular order that might be useful...

1) It started suddenly about 100 miles ago. It was initially only when uphill or at high acceleration. I thought for quite a while that I might be imagining it...

2) After the bike cooled over night it got mostly better, but then when the bike heated up it got worse, and then much worse (as in: happened at all speeds, all accelerations) over the course of about 15 miles, when I made it to a mechanic...

3) I've now changed the spark plug (was iridium, now stock, after reading this http://www.xt660.com/showthread.php?t=21527), which seemed to help a bit (but it's hard to be sure...the bike cooled in the mean time).

4) Since this started, there's been a big increase in back-firing under engine breaking...

5) I managed to drop the bike on its side about 200 miles before this all started (one side of the centre sand sank in the mud...), but I don't see any connection. It landed on a pannier and the handle bar, very minimal damage.

6) The bike's only done 5800 miles. I've checked the oil and so on, all seems fine.

7) It did have a badly fitted kev mod (the air intake temperature sensor variable resistor) which was causing a warning light which I decided to remove about 1000 miles ago, (I don't think it's a real one anyway, didn't look right...). It's also been fitted with a K&N air filter.

8) The mechanic's initial thought was a dry-running bottom end bearing, but I'm inclined to disagree...


So, any ideas?

The current best guess I've got is that it's running too lean. Apparently, this can happen it the K&N filter needs re-oiling? Or, someone the mechanic phoned suggested trying to restrict the air intake breather pipe slightly? Seems somewhat extreme...

Anyway...any suggestions would be greatly appreciated. I'll check this later tonight and in the morning.

Thanks!

Will.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 21:58.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.

  XT660         Archive   Main site


Footer
vBSkinworks Top