![]() |
![]() |
![]() |
|
|
XT660Z T�n�r� Tech Section Tyres, Mods, Luggage & Long distance preparation |
![]() |
|
Thread Tools | Display Modes |
#
1
|
|||
|
|||
PCV Map for the 2in2 Akrapovic exhaust
Hey guys,
Long time no see... Three years ago I was kind of active on this forum, but with all the work and studies I did in the last couple of years there was simply no time left for the Ten! Currenty I have the SR Racing 2in1 exhaust fitted but I'm swapping it for the 2in2 Akrapovic one - the SR Racing is a bit too extreme for me. I'm getting older too ;-) I have DNA Stage 1+2 (DNA Filter and the snorkel removed) with in the near future the Akrapovic 2in2 exhaust fitted. Is the a PCV map around the internet for this setup? Could anyone please point me to that? Thank you! I have the O2 eliminator from Dynojet as well, if that matters. Cheers! Mike |
#
2
|
|||
|
|||
No one any idea where to get a map?
|
#
3
|
|||
|
|||
Have a look
here, in the XTZ section. I'm pretty sure Freez made one for a Ten with the Stage 2/Akra setup?
|
#
4
|
|||
|
|||
Quote:
Freez. PCV 2009 XT660Z Akra exhaust DNA stage 2 air filter Click on link, then Free user" I have no link to click on, then Free user?? I don't get it, sorry. |
#
5
|
|||
|
|||
Quote:
![]() I think your best bet would be to PM Kev, as he created that thread, so I guess may have the original links, or maybe even the map files themselves? |
#
6
|
|||
|
|||
Quote:
Cheers! |
#
7
|
||||
|
||||
The owner of the link has removed the download link, I have deleted the map as he has not responded to my emails & have added another, see below.
Backup_06-22-2012_15-26-55 Yamaha XT-660Z Leovince exhaust, dB-eater installed, no Catalyst DNA Stage 2, snorkel removed
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 ![]() |
#
8
|
|||
|
|||
can i have this map, or can anybody send me this map? ... i have exactly the same setup.
|
#
9
|
|||
|
|||
Quote:
Click on the link in my signature to find out more. |
#
10
|
|||
|
|||
Quote:
I used the industrial printers at work to print out a hard copy in a ring binder which I don't worry about greasy fingerprints. I also have the pdf on my phone just in case I get stuck by the side of the road and need some data.
__________________
Simon Brighton, UK |
Sponsored Links |
![]() |
Thread Tools | |
Display Modes | |
|
|