|
|
XT660Z Tyres What tyres do you have and which are you going to try next - Road / Off-Road |
|
Thread Tools | Display Modes |
|
#
1
|
|||
|
|||
Tyre changing questions ..
Next week i plan to change the tyres on my 660z . The tyres coming off are Dunlop Trailmax .
Are the beads hard to break on the Trailmax ? Should i renew the rim tapes and tubes at the same time ? Tyres being fitted are TKC 80's . |
#
2
|
|||
|
|||
Tyre changing questions ..
Are they the TR91 Trailmax or the ordinary block pattern ones? The TR91s are a sod to break the bead on the rear. TKCs are one of the easiest tyres I've ever removed/fitted.
Trick with the rear is to lift the bead up slightly as roll it inwards over the lip in the rim into the well; best to use a sharp lipped spoon lever for this, but be wary of the tube. For some reason the Z has a tubeless type rim design on the back which doesn't make life easy. You can also use a clamp to break the bead if you want. No need to replace the tape or tube if they are in good condition. It is worth sorting the Cush drive rubbers though while you have the wheels out. |
#
3
|
|||
|
|||
They are the normal block patern Trailmax ... Good point about the Cush drive rubbers ..Where's the cheapest place for them ? Wemoto ?
|
#
4
|
|||
|
|||
Yeah,
Wemoto cheapest for pattern rubbers and
AJ Suttion are cheapest for genuine Yamaha. I have to say that there seems to be precious little difference between how long the genuine and pattern ones last - in fact they're probably the one and the same?!
You'll be fine changing the standard Trailmax, they're pretty flexible. |
#
5
|
|||
|
|||
I changed the tyres on my Gixxer like this....
Might work on the XT too? |
#
6
|
|||
|
|||
Good way of doing it . I'll keep that in mind . Thankyou,
|
#
7
|
|||
|
|||
Quote:
Not sure how well that method would work out on roadside though! On a more serious note, it is worth trying to practice and replicate a method at home that you could use when out on the road/trail; it could help you out of an awkward situation in the long run. Where possible try and use the tools that you would have available to hand on the bike. You could even do it in the dark, maybe get the wife to spray you with a hose, or even kneel in some dog sh!t to make the tyre changing experience as realistic as possible! |
Thread Tools | |
Display Modes | |
|
|