While working on my bike today i realised that mine is missing !
Does it come with it's own loom ? and where does it plug into ?
A lot of the Yamaha switches look the same , will one fit from a different model ..
�60 ish new !

Yes it has its own loom and the connector sits under a rubber boot just behind the rear brake reservoir.

Same part as FZ6, FZ1 and FJR1300 that I know of (possibly others too). There will be a lot more of these models about at breakers I should imagine?

Or just make do without it? Many do...

__________________

Thanks , just got one for �8.99 ebay . Bit cheaper than �60 new

That's a bit of a result!

__________________

On my last ride i replaced the original switch with a hydraulic pressure switch from kedo. It just replaced one of the banjo-bolts by the brake hose and is more immune to water, dirt and debris than the org switch.

http://www.kedo.de/com/ssl/php/art_d...&f_param=40949

__________________
2011 Yamaha XT660Z ABS T�n�r�.

• Puig +8cm dark screen, Garmin Zumo 220, Scottoiler eSystem v2
• Barkbusters Storm with external weights, Noname 30mm bar risers & EzMoto alu. levers
• Kev's O2 Controller, Mccoi stepless controller with Hein Gericke heated grips
• TT +4cm seat, Pivot Pegs, Altech stainless sprocket cover