![]() |
![]() |
![]() |
|
|
XT660Z Mods Share views on all the mods you have done and those you intend to do |
![]() |
|
Thread Tools | Display Modes |
#
1
|
|||
|
|||
Tenere air filters
Hey,
Just got a couple of questions ![]() About the Kev Mod / O2 Controller; the way I understand it the Kev Mod changes the A/F ratio only in the open loop, is that right? and the O2 Controller changes the closed loop to a fixed 13.6 (I think) A/F ratio? would that mean that richening the open loop with a Kev Mod would make the change from closed to open loop harsher than just having a O2 Controller? or have I got this all wrong xD. Cheers, Andy |
Sponsored Links |
#
2
|
|||
|
|||
Quote:
for sealed road use no probs... for offroad..oiled foam then the standard Yamaha paper.. Heres a air filter test... note the K&N was in the bottom 3 filters in every test.... "bottom in most" http://www.dieselbombers.com/chevrol...r-testing.html
__________________
Harley Davidson.. The easyest way to turn gasoline into noise with out the side efect of horse power... |
#
3
|
|||
|
|||
Quote:
![]() |
#
4
|
||||
|
||||
When fitting my O2 controller you are right in saying it changes the closed loop fuelling from 14,7:1 to 13,6:1, the change will make be much smoother with the O2 controller from closed to open to closed loops as the closed & open loop circuits on a completely standard bike will be roughly the same at 13,6:1.
With my fuel mod you can correct the lean A/F ratio of a completely standard XT660 from around 13.6:1 open loop to around 13,2:1 open loop, as the XT660 develops it's best HP & Torque at 13,2:1.
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 ![]() |
#
5
|
|||
|
|||
Kev is basically a genius.....my bike was a pogo stick before I "met" Kev and his mods.....
__________________
(Now sold on, sob) 2011 Blue XT660X with gold wheels, was 26,500 km. Engine mods: K&N Stage 1 filter, DNA Stage 2 filter, snorkel removed, Kev fuel mod fitted. Plus: smoked Puig screen, Yam aluminium sump guard, Yamaha / Acerbis handguards, Givi Trekker aluminium side cases, Leo Vince X3 cans plus Kev front fork mod and Fender Xtender. Just fitted Michelin Road Pilot 3 tyres. SOLD the XTX for a Super Ten 1200. And just bought a Raptor 700 so staying on here for some tips.... |
![]() |
Thread Tools | |
Display Modes | |
|
|