The new forks are already fit on my Tenere. I using Yz 450 2006 forks, (46mm top, 49mm bottom) triple clamp was from was from WR 450 2005. The size was 44mm / 48mm and I machined it 1mm top and 0.5mm bottom to be able to put the forks in. I using the original Yamaha steering stem. Bolt it without problem, only on the top clamp i have to put 1mm spacer between the stem and the clamp(the original stem was top 25mm, the new is top 23mm. The front wheel is from YZ 450.I also changed the handle bars with 28mm. What is left is oversize brake disk 270mm. I did today a proper test.
I need to change the springs with stiffer, It's ok the way it is now but I want to make a proper sag .I already ordered 0.52 this is the stiffest I can get. The rear shock is soft(it will be replaced with Ohlins) and lift it with new bones (35 mm) Some pictures from today:
https://picasaweb.google.com/1111224...67208256081378
https://picasaweb.google.com/1111224...67446019080594
https://picasaweb.google.com/1111224...67629240487890
https://picasaweb.google.com/1111224...67763425992386
https://picasaweb.google.com/1111224...68117483288802
https://picasaweb.google.com/1111224...81233967687378