I am thinking about bidding on this wreck, (only for a spare pair of rims and hubs), no point of bidding against each other if someone else is after a motor or frame.

http://www.manheim.com.au/dv/items/3...=SearchResults

Does not look to bad for a repair job. Send Kriss007 a PM he might take the motor.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

hey wottonboy i would be interested in some parts,

left side foot peg bracket
side stand + stand switch and loom
bracket between front forks
rear chain bracket
and sump guard if it would fi my XT660X

mind you the way my bike is going might be needing the complete engine (might have gearbox issue) but if your just after the wheels only all depends what you want for the complete bike

alex

Hi mate, I'm in Toowoomba, would be interested in brake rotors. Just let me know if available & how much if you win. Good luck with the auction, boneman.

It sold for over $4000, my maximum was less than 1/2 that.

Do people even look at prices before they bid, for truck - sake $5000 buys you one that isn't crashed and registered....

It didn't go to a bike wrecker either.

back to plan B.

If it sold for 4k i wonder what their resale price will be?

Sent from my X10i using Tapatalk

by the time it is fixed and reregistered it would owe them over $6000.