Ive decided to lower the the XT660Z to help when off roading. Ive looked at the metal mule dog bones that lower by 12-15mm and the OTR ones that lower by 50mm. Just wondering if anyone does something about 20mm??

Cheers

Lee

Hyperpro do a 25mm one and a 40mm one

http://www.hyperpro.com/index.asp?NewsID=35#

Cheers Steve, just looked for UK hyperpro dealer (performanceparts). Price is �104 just for the dog bones!!

Think I will have to make do with the metalmule ones.

Erm, I think the phrase f*%k me kind of sums that up !!!! �104 - Surely not, surely that's some kind of mis print?

Buy some platform shoes, it would be cheaper!

__________________
-- Triumph Explorer 1200 --

Just bought some altbergs, they have helped! But need a bit more....

Metal Mule sell them and a fraction of the cost....�25-30 ish

__________________
Previous bikes:TS50 - RD125LC - XT250 - ZXR750L3 - BMW 650 Funduro - BMW 1100GS - XT660Z Tenere

Haven't done one on the Ten, but a few years ago I fitted one to an old BMW F650 for my girlfriend at the time, just involves removing two bolts to free the existing dog bones, then putting the two bolts back in using the new dog bones, with a centre stand fitted it's and easy half hour job.

The Tenere took about 10 mins..

Put it on the side stand.
Get a friend to rock the bike a little and remove both nuts and bolts
remove bolts by rocking the bike to release any pressure


Reverse as above and use new dog legs.It really is that easy

__________________
Previous bikes:TS50 - RD125LC - XT250 - ZXR750L3 - BMW 650 Funduro - BMW 1100GS - XT660Z Tenere

but not with a SW-Motech centre stand installed. It hides the front bolt by a just fraction of a millimeter. Just enough to have the centre stand have to be disassembled too.