Thank you for your offer. It would be very kind of you to send it, IF it makes it easier for Kev, ????? ( but can the "00" run your bike, Kev? err....i'm not that sure it can.)

Ideally, Piasini needs all 3 ECU at the same time.

So, if you can confirm that you are happy to send your ECU to Piasini, and if it helps Kev,please let us know.

can you enable your Private Messaging?

__________________
2008 XTR Mods : DNA Stage 3 Airbox, PC111, Carbon Cans Ovals, Steve Ruth built XTR734cc Big Bore with - High Desert Dyno (HDD)/ Cuervo Racing Gas Flowed / Ported Head fitted with +1mm Valves & uprated Springs, HDD 5050 Camshaft, HDD +3mm Throttle Body, CP 105.5mm 11:1 Piston, Custom Mapping, Piasini ECU, Renthal 613-01, Barkbusters VPS, Pivot Pegz, Touratech Bashplate, Foam Grips, Kev's O2 Sensor Mod, Kev's Extra Coolant Cooler, Wilbers Progressive Fork Springs and Rear Shock

That is great Kev. thank you.



Kev..- will you inform me when you are ready to send your ECU ? as Piasini are going to re-flash my "-10" ECU when it is there, but he needs to understand all the ECU's before he can do that. (i.e. he will need to have seen ALL your ECU's). I have sent you an email which is from Piasini, Kev. Wouldn't it be easier if zaburtante sent his ECU, as I assume that you would send your ECU's one at a time ?

Or, IDEALLY, do we still need another ECU, so that your bike is still operating in the Aussie sunshine?

__________________
2008 XTR Mods : DNA Stage 3 Airbox, PC111, Carbon Cans Ovals, Steve Ruth built XTR734cc Big Bore with - High Desert Dyno (HDD)/ Cuervo Racing Gas Flowed / Ported Head fitted with +1mm Valves & uprated Springs, HDD 5050 Camshaft, HDD +3mm Throttle Body, CP 105.5mm 11:1 Piston, Custom Mapping, Piasini ECU, Renthal 613-01, Barkbusters VPS, Pivot Pegz, Touratech Bashplate, Foam Grips, Kev's O2 Sensor Mod, Kev's Extra Coolant Cooler, Wilbers Progressive Fork Springs and Rear Shock

Kev send a 00 ECU I told hem I just wait for ECU programing results.
Yes I can !

__________________
Ported Head / 0,25 mm Thin head gasket / +2 TB / Stg 2 Hotcam / K&N Filter /Brisk Colder Spark Plug / DNA Stg2 Filter / 35 mm fork Spacers / 15 W fork oil / Fork Lowered 20 mm/ Ais Blocked / re-route engine breather / 44T Rear Sprocked / Carbonium Rear break hose / Crd 40mm exhaust pipe / rear spring two click stiffer / Home made Fork & Swingarm Protectors./ Front fork stabilizer (OTR)