|
|
|
|
|
|
|||||||
| XT660Z Mods Share views on all the mods you have done and those you intend to do |
 |
|
|
Thread Tools | Display Modes |
|
#
1
 25-01-11, 19:52
|
|||
|
|||
|
fuse box - where to buy.
Hi there. Tried to search this but got the old "under minimum length" run around so I hope someone can point me in the right direction. I need to fit a fuse box to the ten (left my heated grips on) tonight. Anyway I've looked through the maplin catalog and they don't seem to do one. Where to try next?
Last edited by redbikejohn; 25-01-11 at 20:12. |
|
#
2
25-01-11, 20:04
|
|||
|
|||
|
__________________
 2008 XTR Mods : DNA Stage 3 Airbox, PC111, Carbon Cans Ovals,
Steve Ruth built XTR734cc Big Bore with - High Desert Dyno (HDD)/ Cuervo Racing Gas Flowed / Ported Head fitted with +1mm Valves & uprated Springs, HDD 5050 Camshaft, HDD +3mm Throttle Body, CP 105.5mm 11:1 Piston, Custom Mapping, Piasini ECU, Renthal 613-01, Barkbusters VPS, Pivot Pegz, Touratech Bashplate, Foam Grips, Kev's O2 Sensor Mod, Kev's Extra Coolant Cooler, Wilbers Progressive Fork Springs and Rear Shock
|
|
#
3
25-01-11, 20:14
|
|||
|
|||
|
Thanks ........ eeek �40 is a bit more than I thought!
|
|
#
4
25-01-11, 20:20
|
|||
|
|||
|
�10.99 from halfords is more my budget (google)
|
|
#
5
25-01-11, 20:57
|
|||
|
|||
|
Double post. Have found some good sites.
|
|
#
6
01-02-11, 13:23
|
|||
|
|||
|
__________________
2008 XTR Mods : DNA Stage 3 Airbox, PC111, Carbon Cans Ovals,
Steve Ruth built XTR734cc Big Bore with - High Desert Dyno (HDD)/ Cuervo Racing Gas Flowed / Ported Head fitted with +1mm Valves & uprated Springs, HDD 5050 Camshaft, HDD +3mm Throttle Body, CP 105.5mm 11:1 Piston, Custom Mapping, Piasini ECU, Renthal 613-01, Barkbusters VPS, Pivot Pegz, Touratech Bashplate, Foam Grips, Kev's O2 Sensor Mod, Kev's Extra Coolant Cooler, Wilbers Progressive Fork Springs and Rear Shock
|
|
#
7
01-02-11, 17:41
|
|||
|
|||
|
i've actually completed the job this last weekend. i got one from Halfords for �6.95 +/-. it's a four way plain blade fuse box. will post pics if you like.
|
|
#
8
26-02-11, 08:42
|
|||
|
|||
|
__________________
former Red owner ! |
|
#
9
26-02-11, 10:01
|
|||
|
|||
|
I got one in halfords and fitted it here:
__________________
check out www.redbikejohn.com for all the latest race reports from the CHEC and enduroland. |
| Sponsored Links |
|
#
10
26-02-11, 10:05
|
|||
|
|||
|
That location isn't flat so I used a bit of heat to bend the mounting tags. Also filled the underside with silicon and used a bit off old inner tube as an extra seal.
__________________
check out www.redbikejohn.com for all the latest race reports from the CHEC and enduroland. Last edited by redbikejohn; 26-02-11 at 13:22. |
|
| Thread Tools | |
| Display Modes | |
|
|
|
|
Linear Mode
