|
|
#
1
|
|||
|
|||
Italian Cans
Saw these on an Italian website... nice!
http://www.motoblog.it/post/14280/sc...a-tenere-660/1
__________________
-- Triumph Explorer 1200 -- Last edited by tenere doug; 17-06-11 at 08:05. |
#
2
|
|||
|
|||
Hello, new to this forum so first some introduction. My name is Patrick and I come from Holland. Last week I took a testride on a Tenere and I loved it so much that I ordered one. Since the original sound of the exhaust is a bit lame I ordered the GPR titanium. I will post a picture and soundfile once I get my bike.
gr Patrick |
#
3
|
|||
|
|||
Hi Patrick, and good to have you onboard! I'm trying to see if I can get a GPR system in the UK, the only dealer I can find is "Pole Position" in London. Can you tell me how much you have paid for your exhaust, as I'm hoping these are a bit cheaper than Akrapovics etc?
__________________
-- Triumph Explorer 1200 -- |
#
4
|
|||
|
|||
Hi patrick welcome to the forum, hoping its what your looking for.
Great amounts of information on the tenere for you. Piccies are a must when you get the bike and the exhausts
__________________
Plough on |
#
5
|
||||
|
||||
and
to
|
#
6
|
|||
|
|||
Quote:
Look forward to the pictures and Sound
__________________
Colin 09 XTZ in Blue and its nearly Stanard. My Mods - Peatbog rear rack |
#
7
|
||||
|
||||
Welcome mate, nice choice of bike.
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 |
#
8
|
|||
|
|||
Thank for the warm welcome.........
The cans are 856euro for the Titanium version without the cat. A lot of money but compared to the Akra a bargain since they are about 1100euro. gr Patrick |
#
9
|
|||
|
|||
Welcome Patrick. It would be greatif you can or whoever is installing the pipes weigh both exhausts so we know how much weight saving there is. Right now there is just no reliable info on this, so you would do us a huge favor. Many thanks in advance.
|
#
10
|
|||
|
|||
Quote:
|
Thread Tools | |
Display Modes | |
|
|