|
|
#
1
|
||||
|
||||
07 XTX First Service
Just dropped the bike off to have its first 600 mile/6 week service and the dealership owner who I booked it in with said did I want either semi synthetic or fully synthetic oil putting in during the service.
I asked what Yamaha recommend and he showed me a pre printed off Yamahlube chart that showed a tick for the XT to have either. I asked the price difference which was �10 but someting in my head said use semi synthetic so I opted for that. I dont think it will make any noticable difference overall but worth the mention. I also pointed out the corrosion I was suffering from and that is getting sorted under warranty and I also pointed out it has a slight top end rattle which I am sure should not be there so they are sorting/looking at that as well. I am just waiting for the call before I collect and will let you know how I got on. Once I get it back I can steadily get it maxed out on the revs, I have been reasonably carefull up to now as I want the motor to last. |
#
2
|
|||
|
|||
Tony,
Would be very interested to know what they do as regards the corrosion problem you have reported as I'm not happy with a few parts on mine where corrosion has started. Nick. |
#
3
|
||||
|
||||
Right then got back from picking up the bike and I am please with the service I received and all my issues are being sorted. I have to say Tamworth Yamaha are spot on.
They inspected the corrosion and were sure it was caused by salt from the roads, as you know I am a bit of a cleaning freak so I am sure its poor finish, they did advise just like Meach did that when I wash the bike use good cleaner which I do and to wd40 the bits that are vulnerable. I will start to do (wd40) this as I dont want a repeat performance. They are swapping all the parts under warranty no problems and will give me a call when the parts arrive to fit. All in my first 600 mile service cost �37.43, I have gone through the check list and they have done the normal things. The top end rattle has gone as well but I dont know what they did to cure it but I am not to fussed as it has gone and now runs smooth again after chains adjustment and lube. I asked about the first 6000 mile or 1 year service costs and they said that all in with parts and labour it will be �137. I am not sure what I get for that but I have to say I am not to unhappy with that price especially as I have to get it done officially to ensure my warranty is valid. I guess I wont do more than 3000 miles in the year so I have to say another great reason to have an XT. |
#
4
|
||||
|
||||
Forgot to say I am interested to know what other UK XT owners paid for their first 600 mile and 1 year service and with whom as it would be interesting to compare costs. Particularly interested in those people local to the midlands.
|
#
5
|
||||
|
||||
Thats a good price for the 6000mile, the service i had before Christmas was about �180
__________________
or olives??? quote motonacio "this is to certify Meach is not the prat you'd think from his posts" http://www.youtube.com/imeach |
#
6
|
|||
|
|||
Quote:
My 1st service cost 49 quid but they did fit a new tube in that price! The tube should have been 45 quid but long story never mind that! I think the 6000 service was about �130. |
#
7
|
|||
|
|||
Tony,
1st service cost �25.97 at Dudley Motorcycle Centre. Did you get a list of what parts they are replacing under warranty? Nick. |
#
8
|
||||
|
||||
Quote:
Gasket �2.00 10/40 semisyn yamalube �30.60 work shop sundries �12.34 Nett �54.46 Vat �9.53 Total �63.99 Last edited by shayne; 23-03-08 at 12:34. |
#
9
|
||||
|
||||
1st/ 600 mle service at Lamda Motorcycles in Wallington was about �39.00, second service due in May.
|
#
10
|
|||
|
|||
first service and warrety parts
My first service was at Bill Smiths motorcycles in Chester. The story is that the service cost �38.00 but because they only put 6 months tax on the bike instead of the promised 12 months, they called it quits. The only other problem I had was when I picked the bike up the clocks wer'nt working properly, couldnot get the speedo to read mph, stuck in kph. they agreed to do the work under warranty but it took yamaha 6 weeks to send a replacement. Is this the usual sort of lead time for warranty replacement bits ? or was this an exception. comments greatfully accepted.
|
Thread Tools | |
Display Modes | |
|
|