Emailed Kev and he stopped making them in 2008. Does anybody still sell them. Are they still a good mod for the soft front suspension?

AFAIK....NO...but the dimensions are 38mm wide by 30mm high..

I had some made up out of an old crash bung/frame slider.

And they did/do firm up the front end.

I have just had new fork seals fitted to my XTX, while they were apart, I went up one grade on the oil and reduced the air gap by 20mm, much better for me than standard, the guy who did them suggested trying that before pre compressing the springs. I was going to do the same to my Baghira but sold it before I got round to it.
I am 15 st and 5-11, other bike is a 1200GS so not used to any front end dive at all.

Al.

Does anybody have any pictures of what the spacers look like.

And does anybody know anywhere else to get them?

They are a simple shape..a cylindrical plug of metal or hard nylon that acts as a spacer between the top of the spring and the retaining nut.

TBH I dont see why a simple stack of the correct sized washers wouldnt do the job too.

Any small engineering firm or a man with a lathe can knock em up in ten minutes.

My brother turned mine up out of old crash bobbin material.

https://www.xt660.com/showpost.php?p...5&postcount=49

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946