|  |  |  | 
|  | 
| 
 | |||||||
| XT660Z T�n�r� Tech Section Tyres, Mods, Luggage & Long distance preparation | 
|  | 
|  | Thread Tools | Display Modes | 
|  | 
| 
               #
            1   
            | |||
| 
 | |||
|  
            stage 3 
            
             hi guys i,ve done throttle, cush , co, fuel , stage 1&2 , 
             bike is nice from what it was , question is will stage three make any difference and cr7 or 8 spark plug, cheers guys | 
| 
               #
            2   
            | |||
| 
 | |||
| 
             Stage 3 airbox cover does make a difference, but only with fuelling adjusted to suit. There is a considerable increase in airflow over a Stage 2 setup. Almost all the power gains from fitting a Stage 3 cover will come at the top end from 5000rpm and upwards.
             As for the plugs... TBH, I can't tell the difference between a standard and iridium plug on the Z and neither between heat ranges 7 and 8! However, there are plenty of people who swear they can "feel" the difference... | 
| 
               #
            3   
            | |||
| 
 | |||
| 
              Quote:
              
 | 
| 
               #
            4   
            | |||
| 
 | |||
|  
            I rode for five years with a Stage 2 setup and was more than happy with it. When you get bored one day and fancy a change, just fit a Stage 3 kit and get down the dyno like I did and inject a bit more life into the motor. Always good to do mods in stages - you'll notice the difference more vividly, plus it keeps you interested the bike! 
            | 
| 
               #
            5   
            | |||
| 
 | |||
|   
              Quote:
              
 | 
|  | 
| Thread Tools | |
| Display Modes | |
| 
 | 
 |