|
|
|
|
|
|
|||||||
| Electrics & Lighting All discussions related to bike electric, lights, bulbs, fuses and wiring. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#
1
 20-08-15, 23:22
|
|||
|
|||
|
XT660R wont run
I used the bike 60km this morning no problems at all, at 9PM a new front light arrived for my bike, i decided to change it right away, now it wont start.^
Bike is running: KN filter DNA stage 2 Delkevic exhaust Power commander V Dynojet autotune You can get the bike running but in that case you will need to have about 50% throttle and it will only rev aprox. 4k rev and splutter. I did manage to get one AFR reading on 4k rev and it seemed to be at 10.. https://www.youtube.com/watch?v=yABtPvTYaFY Here is a video of it "starting". Ive tried to reset to the yamaha original map, still wont work. |
|
#
2
23-08-15, 22:37
|
|||
|
|||
|
Seems like the power commander has died, when i disconnect the PCV the bike starts and runs fine. Talked to OTR and they told me to send the pcv to so that they can check the unit.
|
|
#
3
24-08-15, 08:33
|
|||
|
|||
 That's very interesting.
I don't think I've ever heard of a Power Commander going bad before; the connectors/connections and their optimizer, but never the PC itself. Make sure you report back with what went wrong with it... |
|
#
4
24-08-15, 15:34
|
|||
|
|||
|
Quote:
|
|
| Thread Tools | |
| Display Modes | |
|
|
|
|
Hybrid Mode
