![]() |
![]() |
![]() |
|
|
XT660Z Mods Share views on all the mods you have done and those you intend to do |
![]() |
|
Thread Tools | Display Modes |
|
#
1
|
|||
|
|||
What Sat Nav mount
What's the best Sat Nav mount that fits onto the bar above the clocks? I'm hoping to fit a ram mount arm onto a ball but the bar above the clocks is quite narrow. Any ideas?
|
#
2
|
|||
|
|||
Make a ball for the Ram mount with Sugru
|
#
3
|
|||
|
|||
The clamp I used for mine was also too big. So I used a rubber hose as spacer and cut it to fit. One has to tighten the clamp a lot and I also used some padding under my heavy Garmin Montana to rest on the dash board. That high thin bar transmits a lot or vibration to the GPS. The smaller the GPS and the closer it is to the bar, the less it will bounce up and down on rough roads
__________________
2014 XT660Z - Barrett pipe, DNA stage1.5, Barkbuster hand guards and handlebars, Pivot pegs, Teknik suspension, Guard-it engine protector combo, B&B rear rack, Trax topbox. |
#
4
|
|||
|
|||
I found a ram mount that is meant to fit on a mirror works perfectly on the bar behind the clocks.
|
#
5
|
||||
|
||||
Have a look here, re-use of a golf ball
http://www.xt660.com/showthread.php?...highlight=golf Ciao Solitario |
![]() |
Thread Tools | |
Display Modes | |
|
|