How to connect USB to PCV? - .: XT660.com

darkhelmet · # 1 03-01-15, 22:10

I have a PCV on my Tenere. The previous owner had it installed by a Dynojet tuningcenter.

I wanted to download the tune to my laptop and see whats on there. But i cant seem to find the USB connector. On the PCV itself there seem to be only the connectors for the accessoires.

Any clue?

Pleiades · # 2 03-01-15, 22:15

There's a little rubber bung on the left hand side looking at it from the top.

darkhelmet · # 3 05-01-15, 23:58

Thanks, it appeared to be behind a "warranty seal" sticker, placed by the tuner....

There wasnt a rubber bung as with the other ports though. it was just a rubberish sticker covering it

i managed to connect and download the tune. I now have to get to know the software. From the start, I think TuneEcu is a bit easier and better documented though

sweller · # 4 29-01-15, 09:11

Quote:

Originally Posted by darkhelmet

I think TuneEcu is a bit easier and better documented though

Does the TuneECU software work with a Power Commander V?

I've had a quick scout on the (rather old fashioned) website and couldn't see anything to that effect (I could have just missed it!)

I'm quite interested in the Android version - which hopefully would mean I could easily accept Autotune trims "in the field" using my Android tablet rather than lug a laptop about.

darkhelmet · # 5 05-02-15, 19:48

Quote:

Originally Posted by sweller

Does the TuneECU software work with a Power Commander V?

I've had a quick scout on the (rather old fashioned) website and couldn't see anything to that effect (I could have just missed it!)

I'm quite interested in the Android version - which hopefully would mean I could easily accept Autotune trims "in the field" using my Android tablet rather than lug a laptop about.

No it's not. Maps are exchangeable but that is about it

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode