One of the lads is fitting a lowering kit to his XTX, 30mm dog-bones kit.

1. Does he need to had the sidestand modified ? (I felt it was No, as it leans quite a lot)

2. Does he need to remove the Kev spacers from forks ?

3. Does he need to drop the Yokes through to compensate for the rear being dropped ?

Thanks.

__________________

Was going to exact same questions except fork spacers as mine are standard.
Saw lust racing one and a cheaper aluminium set from china on ebay.

My bike is lowered 30 mm from the previous owner and nothing has been done to the sidestand and it works great. However it does not have the spacermod so I can't comment on that.

The only thing I make sure is that the sidestand is completely down and in the correct position so it doesn't want to fold. But I do the same on every bike, especially at the shop. My nightmare would be to cause a dominoeffect of $$$'s!

__________________
Red XT660X-05. First ever bike.