Just spoken to my local Yam' dealer and they will request new cush drive rubbers to Yamaha UK under warranty. 2 years old in a couple of months, so I thought I'd try my luck now..

Will report back..

__________________

I doubt they'll quibble, I think a fair proportion of the Ten' owners on here had them done at least once.

I think Tripletom had about three sets from Yamaha, although I think they may have said "you're not having any more" after the last set .

Mine were done under warranty at about 14k, and I've since replaced them again with pattern ones from Wemoto - which seem to be holding up pretty well so far, although it's too early to say really whether they are better or worse than the OE ones.

__________________
I spent a lot of money on travel and racing motorcycles - the rest I just squandered.

XT660Z - Commuter, Adventurer...Racer?

www.dashmoto.net

Other bikes >> MT-03 / CG125BR-J / ER-6F
Departed >> ZXR400L3 / EC300 / DR-Z400E / DR800S / GPZ500S / GS400

Got a link for those?

http://www.wemoto.com/bikes/Yamaha/X..._Rubber_-_Set/

�19.15 for a set of four. They're �8.61 each from Yamaha (( here) which is �34.44 the set.

Ask again in nine months or so and I'll tell you how they've lasted.

__________________
I spent a lot of money on travel and racing motorcycles - the rest I just squandered.

XT660Z - Commuter, Adventurer...Racer?

www.dashmoto.net

Other bikes >> MT-03 / CG125BR-J / ER-6F
Departed >> ZXR400L3 / EC300 / DR-Z400E / DR800S / GPZ500S / GS400

Just over 5k miles and I padded them with inner tubes by 2k..

Collected a new set yesterday under warranty, no quibble.

They have asked for the old ones back when I do change them over and I'll be sure to do this as perhaps Yamamhs will find a slightly less soft cheese to make them from!!

__________________

Just curious....what mileage has it done?
Any bad vibes/noises?

I had my first set replaced by yam under warranty at about 6000 mile without quibble

__________________
I'm always in the sh1t, only the depth varies