I bought a Stebel Magnum Compact horn to fit to my '09 XT660X, its fractionally too large to fit where the original horn fits. It actually fits in the space but any vibration it will chafe against the inside of the tank and the top of the radiator. My bike vibrates 'cos its a single, so it will chafe, any one any ideas how or where I can mount the horn. Thanks in anticipation.

Anyone?

The X and R have different side panels...but it fitted my R ok...JUST!

__________________
2008 XTR Mods : DNA Stage 3 Airbox, PC111, Carbon Cans Ovals, Steve Ruth built XTR734cc Big Bore with - High Desert Dyno (HDD)/ Cuervo Racing Gas Flowed / Ported Head fitted with +1mm Valves & uprated Springs, HDD 5050 Camshaft, HDD +3mm Throttle Body, CP 105.5mm 11:1 Piston, Custom Mapping, Piasini ECU, Renthal 613-01, Barkbusters VPS, Pivot Pegz, Touratech Bashplate, Foam Grips, Kev's O2 Sensor Mod, Kev's Extra Coolant Cooler, Wilbers Progressive Fork Springs and Rear Shock

http://www.xt660.com/showthread.php?...ghlight=STEBEL

I did do some juggling to keep it in the original area...

__________________
2008 XTR Mods : DNA Stage 3 Airbox, PC111, Carbon Cans Ovals, Steve Ruth built XTR734cc Big Bore with - High Desert Dyno (HDD)/ Cuervo Racing Gas Flowed / Ported Head fitted with +1mm Valves & uprated Springs, HDD 5050 Camshaft, HDD +3mm Throttle Body, CP 105.5mm 11:1 Piston, Custom Mapping, Piasini ECU, Renthal 613-01, Barkbusters VPS, Pivot Pegz, Touratech Bashplate, Foam Grips, Kev's O2 Sensor Mod, Kev's Extra Coolant Cooler, Wilbers Progressive Fork Springs and Rear Shock

Thanks for the replies Richard, here is how I've had to do it, I had to mount it sideways as it would not fit in the normal horn position so I had to bend a bit of 1"x1/8" steel strip to mount it, and no its not touching the tank.

grumpy, can you still get full steering lock with it positioned there?

__________________
2008 XTR Mods : DNA Stage 3 Airbox, PC111, Carbon Cans Ovals, Steve Ruth built XTR734cc Big Bore with - High Desert Dyno (HDD)/ Cuervo Racing Gas Flowed / Ported Head fitted with +1mm Valves & uprated Springs, HDD 5050 Camshaft, HDD +3mm Throttle Body, CP 105.5mm 11:1 Piston, Custom Mapping, Piasini ECU, Renthal 613-01, Barkbusters VPS, Pivot Pegz, Touratech Bashplate, Foam Grips, Kev's O2 Sensor Mod, Kev's Extra Coolant Cooler, Wilbers Progressive Fork Springs and Rear Shock