I am getting some of these graphics done, digitally (i.e. not one layer stuck over another layer), and they are available to you guys. They were only fitted to this Yamaha Netherlands Limited Edition Model in 2007, and the decals are unobtainable...til now.

They are costing a fair chunk to get done, as they have to scan the shape of the body panel (like a wrap) so... the more I get made, the cheaper it is for me..and you. Please note, they will only be really cheaper if you guys order them initially, to help offset my setting-up costs, scanning, design, printing and cutting etc.


They can be done in any two-colour combination. Just pm me.

__________________
2008 XTR Mods : DNA Stage 3 Airbox, PC111, Carbon Cans Ovals, Steve Ruth built XTR734cc Big Bore with - High Desert Dyno (HDD)/ Cuervo Racing Gas Flowed / Ported Head fitted with +1mm Valves & uprated Springs, HDD 5050 Camshaft, HDD +3mm Throttle Body, CP 105.5mm 11:1 Piston, Custom Mapping, Piasini ECU, Renthal 613-01, Barkbusters VPS, Pivot Pegz, Touratech Bashplate, Foam Grips, Kev's O2 Sensor Mod, Kev's Extra Coolant Cooler, Wilbers Progressive Fork Springs and Rear Shock

Mind they don't peel off after the first wash

What price have you been quoted...might help to put some figures up to guage interest.

Good to see you making such an effort to get your bike the way you want it

__________________

make sure that the printers use a UVA resistant ink and that the are laminated with a UVA resistant clear coat or they will have no colour in 12 mths time ... red is renown for fading..

They are laminated,proper job graphics, and will cost me about �170-�250 !!

Obviously, the price will come down ,with more sets sold. I see some Yamaha OEM graghics on Ebay are �60 for a left hand tank panel.

OR, I take a gamble, and get some extra sets made, to sell later if no interest now.

__________________
2008 XTR Mods : DNA Stage 3 Airbox, PC111, Carbon Cans Ovals, Steve Ruth built XTR734cc Big Bore with - High Desert Dyno (HDD)/ Cuervo Racing Gas Flowed / Ported Head fitted with +1mm Valves & uprated Springs, HDD 5050 Camshaft, HDD +3mm Throttle Body, CP 105.5mm 11:1 Piston, Custom Mapping, Piasini ECU, Renthal 613-01, Barkbusters VPS, Pivot Pegz, Touratech Bashplate, Foam Grips, Kev's O2 Sensor Mod, Kev's Extra Coolant Cooler, Wilbers Progressive Fork Springs and Rear Shock

I think they would look good on a black bike.....with a white and yellow decal.

But you can have any colours you like.

NOTE : These graphics will fit a pre 07 XTX (with the long tank panels), and all XTR models 04-11.

__________________
2008 XTR Mods : DNA Stage 3 Airbox, PC111, Carbon Cans Ovals, Steve Ruth built XTR734cc Big Bore with - High Desert Dyno (HDD)/ Cuervo Racing Gas Flowed / Ported Head fitted with +1mm Valves & uprated Springs, HDD 5050 Camshaft, HDD +3mm Throttle Body, CP 105.5mm 11:1 Piston, Custom Mapping, Piasini ECU, Renthal 613-01, Barkbusters VPS, Pivot Pegz, Touratech Bashplate, Foam Grips, Kev's O2 Sensor Mod, Kev's Extra Coolant Cooler, Wilbers Progressive Fork Springs and Rear Shock

interested in a set to go with orange panels