|
|
|
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
|
#
1
 26-04-09, 15:49
|
|||
|
|||
alternative solution for rear brake fluid reservoir on a 2in1 exhaust system
guys,
I've found a solution which replaces the OEM rear fluid reservoir so it won't stick out anymore. This part is used on a Honda HRC bike. Have a look at the pics for more details. Short description The HRC rear brake reservoir replacement kit consists of a brake fluit resistant transparent tube, a plug and a hose clamp. Drain the brake fluid; I use a special tool for that. Remove the OEM reservoir/hose and replace it with the HRC. Fill the system with new fluid et voila! Greetings from Holland/Groeten uit Holland, Marcel
__________________
bike is sold:
103mm Big Bore|Nicasil cylinder (PowerSeal)|JE piston|CR 11,3:1|ported head (OTR)|Modified cam (OTR)|Powder coated head+cylinder (black)|PCIII|+2 TB l Modded 2-in-1 exhausts (Trinity+Akrapovic)|DNA stage 1 & 2 Filters|Tail Mod|XTX Wheels|XTX chain cover|XTX rear shock connecting arms|Metal footpegs|Acerbis handguards|Hyperpro springs|15W fork oil|Snorkel removed|AIS blocked|NGK CR9EK|SpeedoHealer|Reroute engine breather hose|HRC brake reservoir l Magura Hymec hydraulic clutch
Last edited by marjani; 26-04-09 at 19:47. |
|
#
2
26-04-09, 18:33
|
|||
|
|||
|
Very nice. ive seen these on quite a few race bikes as well
__________________
 Plough on
|
|
#
3
26-04-09, 19:39
|
|||
|
|||
|
that looks trick!
__________________
|
|
#
4
27-04-09, 02:08
|
|||
|
|||
|
or like Holgi did it:
http://freenet-homepage.de/holgizone/ klick for:
Joe |
|
#
5
27-04-09, 08:03
|
|||
|
|||
|
Quote:
Thanks a lot. Marcel
__________________
bike is sold:
103mm Big Bore|Nicasil cylinder (PowerSeal)|JE piston|CR 11,3:1|ported head (OTR)|Modified cam (OTR)|Powder coated head+cylinder (black)|PCIII|+2 TB l Modded 2-in-1 exhausts (Trinity+Akrapovic)|DNA stage 1 & 2 Filters|Tail Mod|XTX Wheels|XTX chain cover|XTX rear shock connecting arms|Metal footpegs|Acerbis handguards|Hyperpro springs|15W fork oil|Snorkel removed|AIS blocked|NGK CR9EK|SpeedoHealer|Reroute engine breather hose|HRC brake reservoir l Magura Hymec hydraulic clutch
|
|
#
6
21-05-09, 19:20
|
|||
|
|||
|
moved the hose a bit. Attached it with the clamp that came with the HRC kit to the side cover.
No big deal but much better than using those ugly tyrips.
__________________
bike is sold:
103mm Big Bore|Nicasil cylinder (PowerSeal)|JE piston|CR 11,3:1|ported head (OTR)|Modified cam (OTR)|Powder coated head+cylinder (black)|PCIII|+2 TB l Modded 2-in-1 exhausts (Trinity+Akrapovic)|DNA stage 1 & 2 Filters|Tail Mod|XTX Wheels|XTX chain cover|XTX rear shock connecting arms|Metal footpegs|Acerbis handguards|Hyperpro springs|15W fork oil|Snorkel removed|AIS blocked|NGK CR9EK|SpeedoHealer|Reroute engine breather hose|HRC brake reservoir l Magura Hymec hydraulic clutch
|
|
| Thread Tools | |
| Display Modes | |
|
|
|
|
Hybrid Mode
