.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   XT660Z Exhausts ( https://www.xt660.com/forumdisplay.php?f=168)
-   -   Leovince's SBK exhaust system ( https://www.xt660.com/showthread.php?t=7791)

beany 05-11-09 10:06

cheers uncle ricky going to wait a little bit longer and see what these pipes are like from wonky. ta

mrwhite 28-05-10 17:31

Baffle(DBkiller) picture
 
Hi guys!! Can anyone help me with a picture of a removed baffle?

I'm in the process of installing some Leo Vince SBK Replica Evo II on the Tenere and I believe that the baffle is different (the cans are from a Hornet 2007).

Thanks a lot!!

Kemizz 28-05-10 23:02

I just fitted my leo's , love the look and the sound of it , but , there is a but offcourse :)

question for those running them ,

First I fitted the mufflers directly onto the pipes , and tested the sound , wow! loud even very loud compared to stock , but I thought , ahh, naah it's ok , untill I took it around the block ,
the backfiring is riduculous loud ! , every bang makes the same sound as you would here something explode , being ,loudddddddd,

then I tried it with the silencers removed , offcourse , very very loud, such a nice sound , but waaaay to loud

then I took a better look inside the box and found some stupid small plates (same diameter as the pipes) with some holes in , friend of mine said , well probably you have to fit those in between the muffler and the linking pipe , and that's what we did , result => much softer sound , but still ok , the banging is still there but is now just sounding cool ...

ok now my question , did all of you fit this plate ? as I don't see anything written on the very short manual ...

and another thing , I'm running stock engine with stock air intake ,
just took the ten for a short trip in the neighborhood and the result , I'm missing power !!! , seriously , the bikes is dead above 4000-5000 , I can fully pull the gas , and the bike does not react like it did with the stock muffler ... ,

do I really need the change the air intake ? with the stage one ?
or am I missing something here ....

thanks you all !

firestorm_al 29-05-10 11:13

What plates? ;)

Kemizz 29-05-10 12:10

problem solved ,

cut off the snorkel with a knife which gives you exactly the same thing as they sell at dna nice sound , and runs great now , even with the plates fitted

http://www.youtube.com/watch?v=ViXtAIoQR4I

enduro374 31-05-10 11:47

Sounds good Kemizz.

The popping (or banging if you've a loud zorst) sound is the AIS (Air Intake Sensor) that opens a solenoid connecting the airbox to the exhaust port to burn off unburnt fuel on a closed throttle and that's where the popping comes from.

I've removed the pipe and capped the connectors at both ends. Search the forum for AIS mod..

You may also want to try Kev's fuel mod and a free flowing air filter to compliment the pipes and snorkel mod..

Once you start, there's no stopping..

uncle ricky 31-05-10 13:15

The small round plates with 5 holes in it will restrict the flow even worse the the standard exhaust. I have done a back to back test when I had mine, the Discs will quieten the leo's but you definitely lose power.

zewl 04-06-10 15:04

Hi All,

Does anyone here have the exhaust emission test result for the Leo Vince pipe?
I badly need it for the inspection for my exhaust. A pdf scan will do.

I bought mine online,and it doesn't have this test result. Do the rest of you have it when you got it from the dealer??

I'm worried now that this pipe won't receive it's legal status here just because of one document.. :(

ZewL

Nelis 04-06-10 17:31

Maybe its on the leovince site.
They also have sound check documents on there

zewl 06-06-10 05:20

Quote:

Originally Posted by Nelis (Post 130269)
Maybe its on the leovince site.
They also have sound check documents on there

Hi Nelis,

I did check their website,and it wasn't there. I've emailed Leo Vince regarding this and hoping that they would reply by this coming week..It would be such a loss for me to sell it off after just getting it..:cry[1]:

Rgds,
ZewL

bor_600 29-12-10 18:54

Hello there.

Today I fitted a set of Leo's on my bike as well, what a difference :). But does anybody have any hints on what to do with the large hole there is now under the seat.
I reckon the underside of my seat, battery area etc will fill up with dirt, water etc like this.. The only thing i could think off quickly is make a rubber flab out of an old innertube.
Soe folks at the Dutch XT660 forum ointed out his real nice storage someone has posted over here, but that's a little out of my league..


regards, Jurre

21 incher 29-12-10 21:16

Quote:

Originally Posted by bor_600 (Post 145437)
Hello there.

Today I fitted a set of Leo's on my bike as well, what a difference :). But does anybody have any hints on what to do with the large hole there is now under the seat.
I reckon the underside of my seat, battery area etc will fill up with dirt, water etc like this.. The only thing i could think off quickly is make a rubber flab out of an old innertube.
Soe folks at the Dutch XT660 forum ointed out his real nice storage someone has posted over here, but that's a little out of my league..


regards, Jurre

Hi there�hmm�any photos of this gapping hole in your life? Thinking of getting a set of Leo�s next year, what are the improvements btw? Would I still be able to put back the MetalMule pannier frames? They�re roughly the same size as the OE when fitted aren�t they? :confused5:
Cheers�

Nelis 29-12-10 21:20

This site shows the solution (scroll dowm): http://massimomiraglia.blogspot.com/...0z-tenere.html


SW-Motech racks fit with the Leo's.

http://94.100.123.67/1081250001-1081...80_6_Ssm7.jpeg

21 incher 29-12-10 21:32

Quote:

Originally Posted by Nelis (Post 145444)
This site shows the solution (scroll dowm): http://massimomiraglia.blogspot.com/...0z-tenere.html


SW-Motech racks fit with the Leo's.

http://94.100.123.67/1081250001-1081...80_6_Ssm7.jpeg


Thanks�but I�ve already fixed & fitted the MM frames to my bike :cry[1]:. A ride to the nearest Leo Vince supplier next Spring then...:112:

Nelis 29-12-10 23:02

I dont think there is much of a difference between all the racks.

I bought my Leo from Ebay, a guy from italy.
Just costed over � 400.

tripletom 12-01-11 14:29

Quote:

Originally Posted by 21 incher (Post 145442)
Hi there�hmm�any photos of this gapping hole in your life? Thinking of getting a set of Leo�s next year, what are the improvements btw? Would I still be able to put back the MetalMule pannier frames? They�re roughly the same size as the OE when fitted aren�t they? :confused5:
Cheers�

Look under the back of the bike, see that big silencer? Well if you take that off, there's a big hole. It's that sort of size. Water and crap does get flung up and over, I know I had some LVs.
As for improvements, a quick dyno run showed 47.75bhp

http://www.youtube.com/watch?v=MsVd0yLsSZE

They aren't really any lighter than OE, and in the end I decided they weren't worth it so sold them.
I wouldn't expect any problems with the MM pannier frames, my home made frames are very close fitting and were fine with the LVs

http://i97.photobucket.com/albums/l2...s/IMG_3127.jpg

Keith Jones 09-02-11 22:26

Nice Bike
 
I have the same pipes and never tried them without the baffles. They are loud enough with them in.

Have fun pop, pop, pop etc..

Nelis 10-02-11 17:52

At first i didn't have to use the baffles.
But at 15000km it suddenly got lots of db's louder?

Right now i cant drive past animals without scaring them, birds/horses fly/run away at 300m when it pops.
So since 5000km i drive with the baffles in, still louder than it was at first.

Hope it will be back to normal after the 20000km check.
Expect it to be back from the dealer at the end of next week.

dallas 11-02-11 05:12

I got the Leovinces shortly after I bought the bike in june �08 and I love them! Much less poppin�(almost none), since the AIS has been blocked, much more relaxed ridin', I think. Just the warm thumpersound.....
For the rest, it's still standard, no Powercommander or other airfilter or such and it runs just fine with still good fuel economy(1:25 on backroads and 1:20 on fast highway stretches).
Greetz, Hans.

Nelis 11-02-11 17:20

I wouldn't want them without the popping.
It doesn't pop all the time, so its no problem.

I dont see why it would be more relaxed.

dallas 11-02-11 22:39

Each its own.....oftewel, ieder z�n smaak.

stuxtttr 15-02-11 20:43

Quote:

Originally Posted by Nelis (Post 149003)
At first i didn't have to use the baffles.
But at 15000km it suddenly got lots of db's louder?

Right now i cant drive past animals without scaring them, birds/horses fly/run away at 300m when it pops.
So since 5000km i drive with the baffles in, still louder than it was at first.

Hope it will be back to normal after the 20000km check.
Expect it to be back from the dealer at the end of next week.


you may want to look at re-packing them, this should result in less noise. I did it with my absolute pipe on my TTR and the result was great :tongue9:

Nelis 15-02-11 22:03

Quote:

Originally Posted by stuxtttr (Post 149367)
you may want to look at re-packing them, this should result in less noise. I did it with my absolute pipe on my TTR and the result was great :tongue9:

That would be crazy quick then, they where just on there for 7000km.
I never let the rain come into the pipes.

Never heard anyone talking about repacking their Leo's.
Dallastx has them for a longer period than me and as far as i know he haven't repacked them yet.

dallas 16-02-11 20:56

Yep, they�re doin� just fine, for about 48.000km�s so far. Njema problema!!

Ohlins 09-05-12 12:11

For information purposes..I checked my spark plug yesterday and found its colour is perfect indicating an engine running at optimum.

My moto has the Leo Vince's,a foam air filter,AIS blocked off and 5000kms

Once I order a side filter cover it might run a bit lean due to more air getting in.

I will check come the time.

:)

wolfraim 08-07-15 22:55

Where can i buy one of these exhaust?
 
Hi, im from Chile and im need a store to buy LEOVINCE EXHAUST for my xt660z and ship it to Chile.

Pleiades 08-07-15 23:11

Quote:

Originally Posted by wolfraim (Post 212290)
Hi, im from Chile and im need a store to buy LEOVINCE EXHAUST for my xt660z and ship it to Chile.

Have you contacted Leo Vince's South American HQ?

Leo Vince South America
Alameda S�o Caetano n� 631 - Sala 2
S�o Caetano do Sul-S.P.
Phone: + 55 11 23768596 / + 55 11 23768593
E-mail: info@leovince.com.br

wolfraim 09-07-15 05:35

Quote:

Originally Posted by Pleiades (Post 212292)
Have you contacted Leo Vince's South American HQ?

Leo Vince South America
Alameda S�o Caetano n� 631 - Sala 2
S�o Caetano do Sul-S.P.
Phone: + 55 11 23768596 / + 55 11 23768593
E-mail: info@leovince.com.br

i will try. English its easy, but portuguese? jajaja i will try, thanks!

Mitsaras 24-04-18 17:58

i just got from a friend a pair of leos.
cant wait to fit them.

They just need new badges,because of the greek sun have lost their colours,a polish by me and they are like new again.

any ideas or tips or products for the polishing?

i m thinking of a way to close the gap under the seat now.

https://i.imgur.com/atCN1Pn.jpg

frdabk 26-06-19 18:12

Quote:

Originally Posted by dallas (Post 68069)
The pipes were 555,- euro's, but I got a discount. A lot cheaper then the Akra's!

where can i find them?

With the T7, maybe the prices wil go down in the future?

Smias 29-06-19 09:52

I am pretty sure that LeoVince discontinued these pipes some years ago..


All times are GMT +1. The time now is 09:18.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.