.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   General & Appearance Mods ( https://www.xt660.com/forumdisplay.php?f=22)
-   -   rack with 07 and CCC's ( https://www.xt660.com/showthread.php?t=4474)

bikespod 31-10-07 22:02

rack with 07 and CCC's
 
Ok, i'm fed up with using a tank bag, that either sounds the horn at innapropriate times, or turns on my hazards, and is also knackering the seat shape where it meets the tank.
Although i really don't want to spoil the lines of the bike, it looks like rack and top box time.
So has anyone found and fitted a rack to an 07 XTX with oval CCC's fitted. I was just wondering if there were any clearance/interference issues??

thanks for any help or recommendations

Nick

CaptMoto 31-10-07 22:05

Yes tedibair's Blue XT he has the oval CCC (the twin pot ones) and a Givi (c)rack :hahaha[1]:
http://www.xt660.com/gallery/display...php?imageid=28

afk40 31-10-07 23:32

2 Attachment(s)
mines has a Hebo becker rack an it fits fine even wi CC cans on it, a havent a picture other then a far off pic....

dazzerrtw 01-11-07 00:06

The Touratech light weight rack I fitted is very compact,and good value for the money.

http://www.touratech.com/shops/008/p...oducts_id=4856




http://i151.photobucket.com/albums/s...w/CIMG1301.jpg

midlife crisis 01-11-07 12:16

Quote:

Originally Posted by dazzerrtw
The Touratech light weight rack I fitted is very compact,and good value for the money.

http://www.touratech.com/shops/008/p...oducts_id=4856




http://i151.photobucket.com/albums/s...w/CIMG1301.jpg

I have the same TT rack with SWMotech Pannier racks � I had to modify the rack to fit with the pannier rack (i.e. drill bigger holes for the pillion grip joiner to fit through). Did you have a similar problem?

dazzerrtw 01-11-07 18:42

The pannier racks are also Touratech,so the rack fit no problem.
It does say on thier site that the rack will fit with no mod's needed.

I may sell this one,and buy the HB one,because I need it to carry a lot of weight and the TT rack will not take the weight of 11lt fuel can and a tent.

FostersMonster 01-11-07 18:53

i got this tank bag and have no trouble with it hittin any buttons and is'nt to bad on long motorway jouneys

http://www.windingroads.co.uk/catalo...roducts_id=112

bikespod 01-11-07 19:10

thanks for all your replies chaps, useful to have a number of options to look into. Nice seat Afk !

maxwell123455 01-11-07 20:47

nice tank bag fosters, i still havent had a chance to see if my old oxford one will fit on and not fault too much stuff. probably not knowing my luck. But �82.00 for a tank bag, bit expensive is it not. I got my old oxford one for �25.

FostersMonster 01-11-07 22:34

Quote:

Originally Posted by maxwell123455
nice tank bag fosters, i still havent had a chance to see if my old oxford one will fit on and not fault too much stuff. probably not knowing my luck. But �82.00 for a tank bag, bit expensive is it not. I got my old oxford one for �25.


luckily i got mine on ebay for about �30 i think it was

bikespod 02-11-07 20:47

After all that i decided to try one of those slip on tail pack things from OTR, should be ok for carting locks around and a few other bits. I'll give some feedback on it after some useage.

bikespod 12-11-07 19:55

well the tail pack from otr is pretty good, although i'd have to say for 50 squids they could have put quick release clips on the straps that attatch to the grab handles, as its a bit fiddly threading and unthreading the buckle all the time. It is small, and only useful for a lock and a collapsable rucksack plus a few other small things.

Naturally it turned up the day after my tank bag magnets picked up a huge rusty nail from work and trashed the paint on my tank :( to add insult Yamaha don't do touch up pots. Need some stickers now.


All times are GMT +1. The time now is 05:43.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.