![]() |
Indicators not working
I installed LED indicators a while back. Worked fine but one snapped so I bought a pair and replaced both rear indicators.
These worked fine for about a day then all four stopped working. The fuse is fine and I have replaced the flasher unit for a LED one but they still don't work. Any ideas? |
TBH I thought that the lights had to be the same,all round on led's..at the least thats what I have always done and never had any issues.
|
They are the same voltage if that helps
|
Is your new led flasher relay an adjustable one with the small screw hole for a plain screwdriver.
|
No, sealed unit
|
Check the relay wires to see if it getting power.
|
Found the cause of the problem, there is another fuse hidden away between the battery and frame in a little single connector, that was blown.
Replaced all working again. |
All times are GMT +1. The time now is 15:59. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.