.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   General & Appearance Mods ( https://www.xt660.com/forumdisplay.php?f=22)
-   -   Turn signals mounting ( https://www.xt660.com/showthread.php?t=27916)

ivanoxx 20-08-18 22:49

Turn signals mounting
 
Hi lads! Bought myself some LED turn signals, unfortunately, they are M10 and XTX is M8 as I just measured... :105: Is it safe to drill bigger hole to the existing one or is there some type of "plate" to re-locate and make myself a m10 hole without drilling the original parts? Is there anyone who've done this? Thanks for help

nikroc 21-08-18 08:51

I drilled the mountings on the front with no problems. The rear's were easy as I'd mounted a plastic enduro style guard.

Dont forget the adapter to allow the led's to flash at the correct speed. http://www.ebay.co.uk/itm/Motorcycle...item238ac9e928

ivanoxx 21-08-18 08:56

How'd you drill the front mountings? just with 10mm drill? and what do you mean by that enduro style guard

ivanoxx 21-08-18 09:00

I've ordered relay already, just realised that mine is 3 Pin isntead o 2 . geez

nikroc 21-08-18 09:33

10mm drill bit worked well http://www.ebay.co.uk/itm/Enduro-Rea...5fe7c0ddd,just go gently.


All times are GMT +1. The time now is 23:36.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.