.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   XT660Z Mods ( https://www.xt660.com/forumdisplay.php?f=165)
-   -   Snorkel ( https://www.xt660.com/showthread.php?t=26667)

MarkXT 04-03-17 15:50

Snorkel
 
Well thanks to Jon for the snorkel I have cut down the standard one.
Still running the standard filter, dna/k+n is next on the list, and haven't had a chance to try it out.

http://i47.photobucket.com/albums/f1...ps772okyeq.jpg

http://i47.photobucket.com/albums/f1...psa3cizcu2.jpg

Smias 06-03-17 13:21

So this is like DNA stage 2 with the stage1 insert or bigger?

MarkXT 06-03-17 14:33

I think stage 2 but still need the filter

DirkZ 06-03-17 16:52

Neat cut job there :)

It looks more like the size of the DNA stage 2 cover
http://i225.photobucket.com/albums/d...EE08394FA0.jpg

The above opening plus DNA filter will need a fuel mod to enrich the mixture.

The stage 1.5 DNA cover looks like this (with the restrictor ring in place) and does not need a fuel mod, just CO adjustment
http://i225.photobucket.com/albums/d...8D1A5B5ABA.jpg

MarkXT 06-03-17 17:39

Cheers for the pics and info, yeah I'd certainly say looks closer to the stage 2.
Filter is next and I have a home made fuel mod, I'll give it a bash and if it's a no no ill get something sorted.
How do you adjust the co?
I tried to make it as neat a cut as possible to air has a good flow

Gas_Up_Lets_Go 07-03-17 10:02

Quote:

Originally Posted by MarkXT (Post 228351)
Well thanks to Jon for the snorkel I have cut down the standard one.

Just a note of caution, the cut down cover has quite a bit of flexibility in it (unlike the DNA cover which is very stiff) and there is a potential that under stress ( a thumping single cylinder next to it) you could end up with small gaps where dirty air can pass, especially when the filter becomes less porous.

Make sure you seal it up with plenty of grease just in case

MarkXT 07-03-17 17:03

Thanks for the heads up, I'll get some grease around it before I take it a run again


All times are GMT +1. The time now is 03:05.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.