Crappy engine casings
 

Hi all,

I binned it down a lane the other day and cracked my clutch cover when the rear brake pedal lent into it. Upon removing it I noticed that the casting is really crappy and has quite a few cracks in it:

https://c2.staticflickr.com/9/8200/2...748bdc7b_z.jpg
https://c4.staticflickr.com/9/8182/2...453257b7f7.jpg

I then looked on eBay and found a used MT03 one that looked just as bad on the inside.

Is this a common thing? I bodge repaired mine with some JB Weld for now but I'm going to CAD it up and CNC a new one out of billet because I now don't trust it in slow speed falls. I'll also be making a folding rear brake pedal and possibly making a GRP casing protector.

Would anybody else be interested in a billet CNC'd clutch cover? Doubt it'll be too expensive.

Cheers!

Oooooooo I want one, cracked my casing 2 weeks ago when I hit a massive rock, whilst climbing a really rough lane, bent my engine bars into the casing 😣and cracked it. Fitted a fire damaged one in replacement.

http://i607.photobucket.com/albums/t...pssvnawhwp.jpg

Put me down for a folding brake pedal, if you're making them!

I've emailed a couple of people about making these, nobody seemed interested.
Can't believe this isn't in the market already!

Have you had a look at the Tusk folding replacement brake toe? Nice and blingy and you can get them in orange too - suits you sir!

Just cut the end of the stock pedal and bolt on said item. Add a brake-snake and you're sorted.

http://www.gnarlyparts.ca/assets/ima...oe_tip-ora.jpg

Available from US here and only cost $20 plus $10 shipping and import duty to UK. You know you want one Steve! :064:

I'd be interested in a billet one depending on price

oh hello!