.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   XT660Z Mods ( https://www.xt660.com/forumdisplay.php?f=165)
-   -   o2 optimizer ( https://www.xt660.com/showthread.php?t=23183)

neilg 01-12-14 22:17

o2 optimizer
 
Hi, Just been starring at my bike for the last 1/2 hour wondering what is the easiest way to refit the o2 sensor!

About 2 years ago I installed a PC V, DNA stage 1 and 2, Akrapovic single can and an O2 eliminator.

I think I have read that the O2 eliminators do not work therefore I bought a dynojet O2 optimizer from the nec bike show last week.

When I had a custom map made the guy removed the O2 sensor as it was now replaced by the O2 eliminator.

My question is that now I want to use the O2 optimizer and re install the O2 sensor what is the easiest way to put the sensor back in the pipe?

Remove pipe?

or can I get to it by removing the bash plate (i have an adv spec bash plate).

Many thanks

Pleiades 01-12-14 22:37

You can get it in/out with the pipe in place, but it is unlikely to be easy due to the probability of the blanking plug having seized in the hole. You can't use a lot of brute force because the pipe isn't that securely attached to the bike and you're most likely to break something, plus there's not a lot of room for wielding a spanner! Best to remove the header and then you can clamp it in a vice and apply heat if necessary and you'll have plenty of room for spannering.

Desert Racer 02-12-14 01:36

Might pay to give it a good soak for while with WD40 or something first before too.

neilg 03-12-14 23:30

Thanks guys for you quick replies. Managed to get the down pipe off and fit the O2 optimiser. Will take it for a spin at some point to see what's new?

Chewy52 20-02-15 07:51

PCV autotune
 
Can any1 tell me if the autotune writes / corrects the mapping when the switch is open or closed ?


All times are GMT +1. The time now is 09:53.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.