O2 Controller questions..
 

Where can I buy this O2 controller? Didn't find it in the xt660-store? Do I need something else? I have a GPR powerjet (some sort of a power commander) and BSM-exhaust and K&N filter on My bike.. In slow speed the bike is a litle bit jerky I think..
Want to get rid of that if it's possible.

What's the difference between the o2-eliminator and the o2-controller? Have not found that information?

Send Kev a PM.

The O2 controller can be bought off Ebay or via PM less Ebay fees. If you want the cheaper version PM me your email address & I will send you an invoice.

The O2 controller is explained here.

http://www.ebay.com.au/sch/7416kevin...p2047675.l2562

Thank you for the information and link!
As I already have a GPR powerjet and planning on byuing a PCV I assume that I don't need the fuel mod but the o2 sensor?

As soon as this is cleared out I will sent you an order email :)

If your going the PC route do the 1+2 filter/snorkel out and the holes in the air box(you can buy rubber bungs to fill in later) and then give it some thought apart from the curiosity of how the bike would run with a 2/1 I've lost interest in the motor it runs that well,all the advantages to be had are in chassi/less weight and brakes and as I've found tinkering with different tire combo's

If you are going the PCV + custom map route then you have two options to control the closed loop mapping, the Dyno jet O2 optimizer or my O2 controller with the PCV.