Simple DIY Tail Mod
 

Ordered a new plate, 7.5" X 6" (still kinda big enough not to get pulled too easily)

Removed the plate illuminator and snipped wires behind the tail.

Fitted the plate bracket above the reflector.

Instead of fixing screws, got a pair of LED Screw bolts
http://www.ebay.co.uk/itm/290941794599

Hacksawed the tail off below the reflector.

Buttsplice the LED lights into the existing illuminator wire.

Self-amalgamating tape round all the connections, tucked them into the rear of the tail and secured with a stick-on clip.


Neat and tidy tail:

http://www.freeimagehosting.net/newuploads/9lmvm.jpg

Looks good mate please can we have some more pics????

Yeah, sorry I'm so late in replying!

Here's the LED Tailbolt (less than 6 $EUR per pair!)
http://www.freeimagehosting.net/newuploads/1d34r.jpg



And here's what I did to the tail, took me all of 10 minutes:

http://www.freeimagehosting.net/newuploads/uv4qf.jpg



The finished product:

http://www.freeimagehosting.net/newuploads/tjdmf.jpg

Looking at your left hand pannier, you could do with my Scottoiler Fling-Catcher mod... ;)

http://i864.photobucket.com/albums/a...ensionMuck.jpg

Ha! Yes, I do!
Will have a think about that myself.

I've just realised that 'existing plate holder' is actually where the plate illuminator sat.
The original fixing holes for the plateholder is on the bit I hacked off.

Can you please upload this pictures again?
Thanks.