.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)

- XT660Z T�n�r� Tech Section ( https://www.xt660.com/forumdisplay.php?f=163)

- - OEM Bash 'plate' ( https://www.xt660.com/showthread.php?t=20109)

OEM Bash 'plate'

I popped in to my friendly mechanic today, just for a chat, first time since buying my Tenere. They suggested drilling a lot of small [e.g. 5mm] holes in the plastic bash 'plate' to help with engine cooling.

Ever heard that this is necessary / good idea??

Thanks

Jon

Quote:

Originally Posted by J-P-W (Post 182741)

They suggested drilling a lot of small [e.g. 5mm] holes in the plastic bash 'plate' to help with engine cooling.

Quite frankly, that sounds ridiculous!:rotf[1]:

Quote:

Originally Posted by Pleiades (Post 182744)

Quite frankly, that sounds ridiculous!:rotf[1]:

Yes..... I concur.

Load of cobblers - don't do it as the plastic bash plate is pretty good!

Seemed weird to me too!

WTF and er do you er trust this er mechanic???? And is your engine overheating??? I always thought that heat rose kind of upwards???? Does yours fall???? Are you in Aussie???? Hehehehehe.

If you wanted/needed to cool the botom end/crank cases..
You would be better of putting a oil cooler in the oil return
line to the oil tank..let the oil take the heat away from the crank case...

yeah, what that lot said ^

The only reason a bash plate is fitted is to protect the bottom of the frame and more importantly the lower extremeties of the engine itself from catastrophic contact with solid objects such as rocks, logs etc

Those who have actually hit solid objects at any pace will testify to sickening sound it makes, and immediatley thank their lucky stars that they had the foresight to fit a decent bash plate, in place of the plastic item supplied by Yamaha.

I assume we all agree that bash plates are essential items to have fitted if we intend using the bike for its "intended" purpose and not just there for show although the plastic bashplate hardly qualifies. There is however, a downside to this....they do limit the amount of airflow around the sump area of the engine. In certain circumstance and particularly in torturous riding conditions, this may result in higher thermal loads being placed on the engine, as the oil, is not able to carry the heat away from the internal running components effectively....(Oil is not only for lubrication, it also serves as a cooling medium.)

Drilling holes strategically in a bashplate is not as silly as it sounds, but it may in fact cause other problems, such as allowing mud etc to build up on the bottom of the engine and may actually reduce the strength of the bashplate itself. How carried away you intend to get with the size and number of holes, would have a lot to do with the expected riding conditions mixed in with a degree of common sense .

If you take a look at some of the bashplates available for adventure and enduro bike you will find that manufacturers that have access to laser cutting facilities tend to provide holes and slots to promote airflow

The object of the exercise is to enhance airflow yet still maximise protection....

Quote:

Originally Posted by Seahorse (Post 182807)

The only reason a bash plate is fitted is to protect the bottom of the frame and more importantly the lower extremeties of the engine itself from catastrophic contact with solid objects such as rocks, logs etc

Those who have actually hit a solid objects at any pace will testify to sickening sound it makes, and immediatley thank their lucky stars that they had the foresight to fit a decent bash plate, in place of the plastic item supplied by Yamaha.

I assume we all agree that bash plates are essential items to have fitted if we intend using the bike for its "intended" purpose and not just there for show although the plastic bashplate hardly qualifies. There is however, a downside to this....they do limit the amount of airflow around the sump area of the engine. In certain circumstance and particularly in torturous riding conditions, this may result in higher thermal loads being placed on the engine, as the oil, is not able to carry the heat away from the internal running components effectively....(Oil is not only for lubrication, it also serves as a cooling medium.)

Drilling holes strategically in a bashplate is not as silly as it sounds, but it may in fact cause other problems, such as allowing mud etc to build up on the bottom of the engine and may actually reduce the strength of the bashplate itself. How carried away you intend to get with the size and number of holes, would have a lot to do with the expected riding conditions mixed in with a degree of common sense .

If you take a look at some of the bashplates available for adventure and enduro bike you will find that manufacturers that have access to laser cutting facilities tend to provide holes and slots to promote airflow

The object of the exercise is to enhance airflow yet still maximise protection....

Good reply. thanks

this doesnt apply to people who live in the UK...as a heat wave for us 20 degrees!!!! :) :)