EGR Plate
 

Do any UK company's sell the EGR blanking plate that 'off the road' sell ?

http://www.off-the-road.de/XT-660-Z-...it-XT-660.html

Would of thought you could very easily make one from a piece of steel knocking around. Angle grinder + drill.....

That would require something I don't have......enthusiasm.
Anyway I found one, Wemoto do em.

Did you have a link for that piece by chance?

:)

.

Sorry my mistake, I was looking at something else. I will keep on searching.

No problem...

:)

.

is it for blocking off the AIS? you taking the whole lot out?

i did it on my fazer but it was much simplier.

I blocked the AIS (I'm a car mechanic so always called it EGR) off ages ago but may be stripping the bike soon so thought I would do it properly. I could obviously get one from OTR but the shipping is as much as the part.

Does anyone know the hole centers, length, width etc of the AIS plate. Found a load on ebay for land rovers in 4mm plate. look similar and only 2 quid.

http://compare.ebay.co.uk/like/33056...pe=pla&crdt=0#

My Disco 1 300tdi has it's EGR blanked off...the plate you see will be too big by far..

(Maybe if you order fuel filters/oil etc from OTR then it'll help take the sting out of the shipping?)

:)

.

I gave up my quest and got one from OTR, along with a spare chain link and a DNA filter.

Christ they know how to charge!!