![]() |
Looking at the run files after Kris's Dyno run I was wondering what all the spikes were, clutch slip or wheel slip on the Dyno, so I asked a good friend to have a look at the run files & he said the clutch was slipping, so Kris pulled his clutch down today & the clutch was fried & that is with the uprated clutch.
http://i201.photobucket.com/albums/a...--TEXT-WEB.jpg |
Quote:
we have heavier clutch springs available, but their are some modifications available to make it hold the power |
Kris was running an extra clutch plate + heavy duty springs at the time, the XT's clutch is quite different to the Raptors, Kris could not adapt the clutch hubs from the Raptor to the XT's motor.
We will wait for Kris & he can explain further. |
Clutch Mods
Thats right Kev
I had removed the half fibre plate and replaced it with a full fibre plus heavy duty springs,but thats not enough I have now fitted a new complete raptor700 set of clutch plates with 2 steels back to back and have ordered some heavy springs from DL700, see if this holds. |
have u ridden it yet?
|
yes DL, but not hard yet its wet here.
|
xt 778 cc Clutch Mod's
I have been playing with the clutch and have had a win, I have been able to fit the raptor 700 complete clutch presure plate assy, clutch fibre & steel plates, clutch springs inside the xt 660 basket, with an extra steel and fibre the same as a raptor, all fits and works inside the xt 660 clutch cover.
New clutch mod list: xt 660 clutch basket xt 660 clutch pushrod lifter with new spacer raptor 700 complete clutch pressure plate assy raptor 700 full set of steel clutch plates x 7. STD xt 660 x 6 raptor 700 full set of fibre clutch plates x 8. STD xt 660 x 7 raptor 700 full set of clutch springs x 6 (DL700’s heavy springs ) STD xt 660 x 5 |
Nice work Kris.
|
NICE !!!
the OEM 04-05 yfz 450 atv fibers hold power a bit better and a bit less cost they are the same size and fittment just larger puck sizes 5TG-16321-00 if anyone needs i have access to good used Raptor parts and international shipping isnt too much flat rate |
Thanks Daniel.:sbike:
|
All times are GMT +1. The time now is 12:57. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.