Error code 19. XT660r 2006.
 

Does anyone know how to solve the problem with the code 19. The display showed me a couple of times this error, but after 10 minutes, I started the engine, only now this error is permanently and will not start engine at all. It seems that is the error of the sensor sidestand, but the service said that the error in the CDI box (they are not sure?!) Has anyone had this problem, and how to solve it? Tnx

Firstly welcome to XT660.com

Trace the Blue/Black wire that runs to the Engine ECU it will have a poor connection or open circuit, fault code 19 represents an open circuit fault at the time of cranking.

The blue / black wire runs between the starter relay & clutch switch.