![]() |
Gear lever
Has anyone found a good gear lever to replace the OE one that come loose on the shaft? I would imagine toura**** do one, but I don't think I'd get much for my kidneys.
|
Quote:
|
I've not seen any other than Toura****. I think I'm going to end up buying one from them at some point, since my second OE lever is now getting a bit sloppy on the shaft.
|
I have one , but it doesn't fit my bike ..
I tried it in many ways, it always get stuck against the side stand , my side stand must have been bended somehow during offroad abuse , and now this stupid thing doesn't fit anymore , I will just buy another OEM one I think cause there is now way of bending the side stand again .. it's strange since the side stand is quite a thick pieace of metal , especially on the part where the gear lever touches |
Quote:
|
Gear lever
That gear lever comes loose so often.
I cut the side stand switch bracket off(having by past the switch long ago) This enables you to get 1st gear when the lever keeps wearing The last time I took it off , I noticed that the actual shaft is now badly worn My bike now has 46 000 km on |
a common problem.
I modded mine a bit: removed the original screw and replaced it with a longer one, before put a nut next to the head. Then inserted the new screw and tightend the lever with the nut. Never got loose again. BTW: I'm using this one: http://www.off-the-road.de/de/XT-660...r-einfach.html salu2, Joe |
Aye, drilled the threads out and put a nut and bolt in - never come lose again.
|
Quote:
I think you need to come and ride in the deserts where its a little dryer ! |
Quote:
Try a wrap of PTFE? |
All times are GMT +1. The time now is 23:54. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.