-
XT660Z Mods (
https://www.xt660.com/forumdisplay.php?f=165)
- -
Centre Stand (
https://www.xt660.com/showthread.php?t=18419)
An easy way
Quote:
Originally Posted by
Pepsi (Post 201937)
I'm not sure if this would help with the spring issue as I have not seen how the set up works for the centre stand, but I used zip-ties (cable ties) on the springs that attach silencer cans to exhaust pipes.
My method was to put the zip tie through the last ring of the spring or the 'hook' at the end of the spring and then make a loop out of the zip tie ( or 2 zip ties end-to-end ) and then use the loop of zip ties as a hand pull to pull the spring up to the fixture point.
|
My easy way to fit the spring, (the same way as fitting springs on truck brake shoe mounts) is to use the largest star (phillips) srewdriver. The star part of the screwdriver will grip the spring retainer, so place the hook of the spring on the shank of the tool & lever the spring down over mount. A true believer of the K.I.S.S. theory :045:
|
All times are GMT +1. The time now is 20:34. |
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.