.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   XT660Z T�n�r� Tech Section ( https://www.xt660.com/forumdisplay.php?f=163)
-   -   throttle cables again ( https://www.xt660.com/showthread.php?t=18348)

Kemizz 17-01-12 15:43

throttle cables again
 
again about throttle cables

I'm still planing to raise my bars at least another 2 cm , to that makes about 5 total ...

I currently have 25mm risers and renthal enduro high bars ,

at 1m90 I still do not feel to comfortable standing up ,

so I want to go with something like rox risers ,

problem will be the throttle cables ,

I know I can go and find a company here or in the UK who makes custom cables ,
but I'm wondering if other Yahama bikes are using the same parts like for example the throttle assembly

if this is the case another yamaha bike cable (a longer one :) ) would maybe also fit the tenere ?

Anybody ?

What about the X and R cables , are they the same ?

:team[1]:

uberthumper 17-01-12 16:09

I have literally just posted my cables off to Venhill ( www.venhill.co.uk) to get them to make me a set 120mm longer. About �41 for a pair of throttle cables according to their website.

I've heard nothing but good things about Venhill in the past, but will of course report back as and when I get my cables.

And of course once they've done mine you should hopefully be able to order a set without sending yours to them.

Kemizz 17-01-12 18:58

Quote:

Originally Posted by uberthumper (Post 166990)
I have literally just posted my cables off to Venhill ( www.venhill.co.uk) to get them to make me a set 120mm longer. About �41 for a pair of throttle cables according to their website.

I've heard nothing but good things about Venhill in the past, but will of course report back as and when I get my cables.

And of course once they've done mine you should hopefully be able to order a set without sending yours to them.

that would be awesome ,

what are they doing with the plastic parts ? like for example the piece which goes inside the throttle control on the handlebar , are they using your oem onces ? or do they also remake those ...

let me know !

uberthumper 18-01-12 10:03

I guess that's the only question. I ticked the box on the order form to say they could reuse parts if they needed to. I don't know if they will yet. If they do then I guess they'll always need a 'donor' set.

I'll let you know.

Kemizz 27-01-12 00:33

how long do they need normally to make cables?

Peregrine 31-01-12 13:30

Throttle Cables
 
My twin Throttle cables, Clutch & Front brake line set are all at Venhills and im expecting a call today, I have 30mm risers and added the Renthal 613 and found that all 3 sets required modification, ive been able to re-route the electrical ones but found the rest either short or very short! I was told that Venhills turnaround was circa 3 days (if quiet) but i would assume around 7-10 being more realistic.
Steve..

uberthumper 31-01-12 14:18

Quote:

Originally Posted by Kemizz (Post 167438)
how long do they need normally to make cables?

I posted mine on a Tuesday, so they would have had them Weds. I had them back the following Thursday.

They did strip my cables for the plastic guides at the twistgrip end, so I don't know if you would be able to get a set done without sending yours to them.


@Peregrine: Odd, my throttle cables were way, way too short (I had 120mm added to the new ones) but my clutch cable is still fine.

Kemizz 01-02-12 16:32

Quote:

Originally Posted by uberthumper (Post 167633)
I posted mine on a Tuesday, so they would have had them Weds. I had them back the following Thursday.

They did strip my cables for the plastic guides at the twistgrip end, so I don't know if you would be able to get a set done without sending yours to them.


@Peregrine: Odd, my throttle cables were way, way too short (I had 120mm added to the new ones) but my clutch cable is still fine.


and how expensive was it ? as I have a spare oem one new in package ,
I can just sent it to them , but it depends how expensive it is , I also have to pay shipping to england

uberthumper 01-02-12 17:04

Price list here:

http://www.venhill.co.uk/Bespoke_Hos.../Custom_Cables

I paid �48.31 including the postage back to me in the UK. Plus what it cost to post to them, which I can't remember.

Peregrine 02-02-12 11:51

Hi Uberthumper, Yes my Throttle cables are being given around 6.5/7 inches in extra length, the Clutch cable was too tight even on right hand lock? from what i can gather there seems to have been some cables routed differently on certain bikes, anyway Venhill had my cables etc last Wednesday and i have been told i will get a phone call from them today (2.2.12), hope so as im "champing at the bit" to get it built back up.


All times are GMT +1. The time now is 08:02.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.