.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   XT660X/R Exhausts ( https://www.xt660.com/forumdisplay.php?f=222)
-   -   Metal Mule 2-1 Exhaust Installed w/pics ( https://www.xt660.com/showthread.php?t=17432)

Nutt 08-08-11 06:17

Metal Mule 2-1 Exhaust Installed w/pics
 
Well I told michaeld I would post up some pics after the install of my 2-1 exhuast so here we go.

The past couple of weeks have seen the install of the following components-
The 2-1 exhaust system, bash plate and radiator shroud from MM.
The full length front guard, 48t rear stealth sprocket along with a paper-to-foam style air-filter kit from OTR .
I already had my 14t front installed from Woottonboy a few months ago thanks again
I bought the DID x-ring chain along with Dunlop606 tyres locally recently.
Speedo healer installed in the tool compartment (next to the Kev-Mod)

Time to hit the bush!


http://members.optusnet.com.au/mbmw/XTR/DSCF3399.JPG

http://members.optusnet.com.au/mbmw/XTR/DSCF3392.JPG

http://members.optusnet.com.au/mbmw/XTR/DSCF3403.JPG

http://members.optusnet.com.au/mbmw/XTR/DSCF3410.JPG

http://members.optusnet.com.au/mbmw/XTR/DSCF3411.JPG

http://members.optusnet.com.au/mbmw/XTR/DSCF3413.JPG

http://members.optusnet.com.au/mbmw/XTR/DSCF3415.JPG

http://members.optusnet.com.au/mbmw/XTR/DSCF3424.JPG

metal_mule 08-08-11 10:03

Looking good! I keep finding myself looking at secondhand xt660s!

CaptMoto 08-08-11 11:13

Quote:

Originally Posted by metal_mule (Post 160195)
Looking good! I keep finding myself looking at secondhand xt660s!

Go on then, man up! :laughing8: :019:

Kev 08-08-11 11:14

Looks real good, to clean to ride off road.

crowman 08-08-11 11:54

This looks well tidy,and whats the engine runing like,and have you had to change the carb set up ect.

cjax 08-08-11 12:21

I'm loving the look of those tyres, are they off road only?

Also what is the front mudguard? Is it designed specially for the XT or is it a generic one?

tacomodo 08-08-11 12:55

Forgive my ignorance, but if this is same engine as the Tenere, any chance you could post a video of the sound??

enduro374 08-08-11 13:08

Very nice indeed Nutt..

metal_mule 08-08-11 15:56

Quote:

Originally Posted by CaptMoto (Post 160197)
Go on then, man up! :laughing8: :019:

Ha ha! Maybe next bike! or 2nd bike!

Nutt 09-08-11 00:28

crowman- the engine always runs like a dream- she's fuel injected so even on a crisp cold morning one push of the start button and it fires up and is ready to ride. No choke, no coughing and spluttering any time. The new exhaust system has the mount in place for the exhaust temp sensor in the header (a few inches from the cylinder) just like the stock exhaust did, so the computer makes all the adjustments on the fly to keep it purring.

cjax- the tyres are DOT rated making them legal for road use which is why I chose them. If I was choosing a 100% dedicated offroad tyre I would choose a Michelin S12 or similar but this was the most aggressive offroader I could find with a road safe rating, however they will have less road manners than the original tourance, I don't expect to be leaning in as hard through the twisties on road surface, but will be going much harder off road in the scrub. The font guard is from OTR ( http://www.off-the-road.de/en/home/) and yes it is designed specifically for our bikes. I needed to remove the splash guard to prevent mud build up between the front tyre and splash-guard but then the original half front-guard would not protect the radiator/bike.

tacomodo- I'll work on a video over the weekend when we head away. It is a good sound thump-thump-thump, it's louder all around however it's not a nuisance when cruising, but then it certainly barks loudly! when you open the throttle, then I'd guess it's about half way between open throttle and cruising volume when I decelerate.

Thanks for the comments :)


All times are GMT +1. The time now is 15:25.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.