Originally Posted by FZ1 Racer (Post 159582)

Hi Kev,ok so engine wise I've got stage 1 and 2 DNA filters,snorkel removed,Kev fuel mod,4mm oversize headers and Mivv carbon cans and adjusted CO up to 20 from 13 and I'm loving it but would like a bit more bhp without spending a fortune so my question is,is it worth putting a stage 1/2 cam in without modifying the head ie,gas flowed excetra,with a cam would I really need to get a PC to get the most out of it and what make of cam do you recommend,is OTR's cam any good,cheers.

Originally Posted by Kev (Post 159592)

I would go straight to a stage 2 Hot Cam, I got 59 rear wheel HP. With the OTR cam you really need to add more compression as their cam is like a stage 3 Hot Cam & looses lots of bottom end when using stock compression ratios.

With all your mods now I would be saving up for a PCV or PCIII to correct the A/F ratio, you will definetly need a Power Commander with the hot cams.

I have a custom made fuel map for the stage 2 hot cam 660cc which will help you in the mean time until you can get a custom made map made.