![]() |
Under Bar Damper on my Tenere
Fitted my damper today, wasnt the easiest damper I have ever fitted I have to say but worked out great The damper is a rebadged MSC a great Aussie made product
http://i323.photobucket.com/albums/n...0/IMGP0249.jpg Original setup with bar risers The ignition cover needs to come off, two allen screws http://i323.photobucket.com/albums/n...0/IMGP0255.jpg Once the cover was removed it reveled the steering lock bolts are shear bolts. Once they are tight they shear and it prevents people unbolting the steering lock http://i323.photobucket.com/albums/n...0/IMGP0257.jpg http://i323.photobucket.com/albums/n...0/IMGP0256.jpg http://i323.photobucket.com/albums/n...0/IMGP0258.jpg I drilled a small hole in the cente and once I was sure it was in the centre I drilled it as big as I dared below the head height http://i323.photobucket.com/albums/n...0/IMGP0259.jpg I then used a drill bigger than the bolt shaft size to get rid of the head http://i323.photobucket.com/albums/n...0/IMGP0260.jpg I used an easy out and removed both bolts http://i323.photobucket.com/albums/n...0/IMGP0262.jpg http://i323.photobucket.com/albums/n...0/IMGP0265.jpg Both bolts out, ready for the pin bracket http://i323.photobucket.com/albums/n...0/IMGP0267.jpg http://i323.photobucket.com/albums/n...0/IMGP0281.jpg Once done I removed the standard bar mounts and mounted the bar mount bracket, it needed a spacer between the rubber mounts and the bracket http://i323.photobucket.com/albums/n...0/IMGP0280.jpg It was now I discovered I hadn’t listened to Steve when he said it is a fat bar mount, I flew down got Suttos and got a few sets of bars so I could try a few before I decided. (try that with your cheap US web shops :laugh: ) Once a set was found I bolted it all up and happy days http://i323.photobucket.com/albums/n...0/IMGP0283.jpg http://i323.photobucket.com/albums/n...0/IMGP0282.jpg http://i323.photobucket.com/albums/n...0/IMGP0284.jpg http://i323.photobucket.com/albums/n...0/IMGP0285.jpg http://i323.photobucket.com/albums/n...0/IMGP0290.jpg http://i323.photobucket.com/albums/n...0/IMGP0289.jpg I then drilled and tapped a thread to mount my GPS http://i323.photobucket.com/albums/n...0/IMGP0286.jpg http://i323.photobucket.com/albums/n...0/IMGP0287.jpg The only other thing need was a fat bat bark buster mount kit TB |
Nice post, can you post where to buy them from for the boys.
|
Follow the link. Steve is very easy to deal with. I got one on my Ten and like it a lot.
https://www.adventuremoto.com.au/pro...7ef78cd31e3024 |
Quote:
www.adventuremoto.com.au Tell Steve that Greg from OBT sent you, you will get looked after |
All times are GMT +1. The time now is 12:24. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.