.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   XT660X/R Mods ( https://www.xt660.com/forumdisplay.php?f=223)
-   -   09 X swing arm on an R ( https://www.xt660.com/showthread.php?t=15021)

cdo1uk 17-09-10 09:31

09 X swing arm on an R
 
just got hold of an 09 XTX swing arm and was thinking of putting it on my R. apart from the swing arm, wheel and bike what other bits off the XTX will i need to fit it?

thanks

maxwell123455 17-09-10 10:25

Quote:

Originally Posted by cdo1uk (Post 139028)
just got hold of an 09 XTX swing arm and was thinking of putting it on my R. apart from the swing arm, wheel and bike what other bits off the XTX will i need to fit it?

thanks

Id make sure you get all the spacers for the rear wheel along with any spacers, bearings or spindles for the swingarm where it attachs to the bike

cdo1uk 17-09-10 10:28

Quote:

Originally Posted by maxwell123455 (Post 139035)
Id make sure you get all the spacers for the rear wheel along with any spacers, bearings or spindles for the swingarm where it attachs to the bike

got them....

Kev 17-09-10 11:44

:hello2:Should look good.

From 2007 onwards the XTX has shorter rear shock travel than the XTR, so if you have the XTX shock fit it so you have less lift from the rear under hard braking.


All times are GMT +1. The time now is 23:50.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.