.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)

- XT660Z T�n�r� Tech Section ( https://www.xt660.com/forumdisplay.php?f=163)

- - Tenere NoGo... ( https://www.xt660.com/showthread.php?t=13910)

SingleMinded

10-05-10 10:12

Tenere NoGo...

...

when starting the bike this morning:

- starter motor did its job just fine
- engine failure indicator light comes on when pressing the starter button
- all electrics seem to work fine
- hooked it up to a car battery just in case the bikes battery had gone bad... but no effect

...no reason to pity me: had to pull out the MT-03 to take me to the office so there was a grin on my face when I finally arrived!

Any idea's? I'll try to get some diagnostic information from the bike's CPU (how's that done? Is it in the workshop manual?)

HJ

uncle ricky

10-05-10 11:28

Quote:

Originally Posted by SingleMinded (Post 128416)

Was it in gear

SingleMinded

10-05-10 12:37

Nooooo....

I've got some tips from another (Dutch) forum. I'm gonna give them a try this evening. Something procedure to reset the CPU&TPS.

HJ

SingleMinded

10-05-10 20:40

Problem solved by:

- push starter button
- open throttle to the max

... hoppa! TjouTjouTjou... changes to BlobBlobBlob!

This seems to be the way to reset an confused ThrottlePositionSensor...

HJ

stoic bloke

10-05-10 22:00

the same thing happened to me a couple of months ago.the bike churned over fine but no attempt of firing up, so i used my van instead. when i returned home the bike started only after i tweaked the throttle while trying the starter.

so mine has suffered this computer/tps confusion, at least we know how to reset
thanks for that!:smilies0942:

slugg

11-05-10 10:01

Quote:

Originally Posted by stoic bloke (Post 128470)

fine, so you pulled the throttle max and started when holding the throttle ?

SingleMinded

11-05-10 19:15

Xactly!

HJ

All times are GMT +1. The time now is 07:11.